OFI400C Fiber Identifier
Contact Info
- Address:深圳市南山區(qū)西麗鎮(zhèn)平山一路民企科技園7棟6樓, Zip:
- Contact: 曹小姐
- :18025310862
- :zb52@szprc.com
Other Products
The OFI400 is a handheld, low-cost fiber optic identifier that enables non-destructive testing of optical fibers. The OFI400C utilizes low insertion loss "macrobend" detection technology to identify optical signals without interrupting service or excessively squeezing the fiber. During the installation, cutting, splicing, maintenance, and repair of fiber optic systems, the OFI400C is used to identify fibers carrying live traffic signals (CW) or modulated tone signals, and can also identify fibers with no signal. The OFI400C detection technology allows for gradual bending of the fiber under test over a short length. This technique ensures that the stress on the fiber remains low, features very low insertion loss, and provides high-sensitivity signal detection capability down to –50dBm.
Main Features of the OFI400 Fiber Optic Identifier
* Power and tone signal display function
* Backlight display function
* Low cost, high performance
* Handheld, operates on 2 AA batteries
* Low insertion loss, wide testing range
* Applicable to: 250μm/900μm/2mm/3mm coated fibers
* Only one adapter required to test 250μm/900μm and 2mm/3mm coated fibers
* Four tone detection functions (270/330/1000/2000Hz)
* Bidirectional traffic signal indication
* No signal indication
* Low battery indication
Performance Specifications of the OFI400 Fiber Optic Identifier
Fiber Type | Parameter | Wavelength, Signal | Test |
250 micron coated fiber (SMF-28 with CPC6 coating) | Detectable Level (Average Power, Typical) | 1310nm, CW or with traffic 1310nm, with identification tone 1550nm CW or with traffic 1550 nm, with identification tone | -43 dBm -40 dBm -50 dBm -45 dBm |
Insertion Loss (Typical) | 1310nm 1550nm | 0.6dB 2.5dB | |
3mm coated fiber (SMF-28 with CPC6 coating and 3mm yellow jacket) | Detectable Level (Average Power, Typical) | 1310nm, CW or with traffic 1310nm, with identification tone 1550nm CW or with traffic 1550 nm, with identification tone | -30 dBm -28 dBm -33 dBm -30 dBm |
Insertion Loss (Typical) | 1310nm 1550nm | 1.0dB 2.8dB |
Note: All specifications are typical values; actual conditions may vary by several dB depending on factors such as fiber type, coating material, jacket color, and jacket hardness.
OFI400 Fiber Optic Identifier Optical Specifications | |
Detector | InGaAs |
Operating Wavelength Range | 800 to 1700 nm |
Calibration Fiber Size and Wavelength | 250 μm (SMF-28) @1550 nm |
Fiber Stress During Test | 100 kPSI |
Device Under Test Sizes | 250 μm, 900 μm, 2mm or 3mm, and flat fiber |
Identification Tone Recognition | 270, 330, 1000, or 2000 Hz (+/-10%) |
Signal and Tone Detection Capability | +20 dBm to –45 dBm |
In-line Power Detection | +6 dBm to –40 dBm |
Measurement Units | dBm, dB |
OFI400 Fiber Optic Identifier General Specifications | |
Display | Dual 7-segment LCD, 3 LEDs, 1 buzzer |
Operating Temperature | 0° to 50° C, 90% RH (non-condensing) |
Storage Temperature | -30 to +60° C, 90% RH (non-condensing) |
Power Supply | (2) 1.5V Alkaline batteries |
Battery Life | > 10,000 tests |
Dimensions (L × W × H) | 22 × 3.8 × 2.8 cm |
Weight | 168 g |
OFI400 Fiber Optic Identifier Ordering Information
The standard package of OFI400 includes: Main unit, carrying pouch, (1.5V) batteries, instruction card.
| : | Machinery & Equipment/Fans & Ventilation Equipment/Air Curtains |
|---|---|
| : | |
| Brand: | |
| : | |
| Stock: | |
| Origin: |
