Hydraulic Power Pump
1. Complies with the requirements of the GB/T17906-2021 "General Technical Conditions for Hydraulic Rescue Tools" standard.
2. Rated operating speed ≥3400 rpm, rated power ≥2.2 kW, conversion pressure ≥5 MPa, hydraulic oil tank capacity ≥4 L.
3. Rated working pressure ≥72 MPa, high-pressure flow ≥0.75 L/min, low-pressure flow ≥3 L/min.
4. Mass ≤24 kg.
5. Can be set to double-speed mode in single-output mode, with work efficiency twice that of dual-output mode.
6. Equipped with 2 dedicated single-interface hoses (one 5-meter hose).
Hydraulic Cutter
1. Complies with the requirements of the GB/T17906-2021 "General Technical Conditions for Hydraulic Rescue Tools" standard.
2. Opening distance ≥160 mm.
3. Maximum cutting capacity (Q235 material) ≥ φ30 mm round steel ≥ 10 mm thick steel plate.
4. Cutting force ≥500 kN, rated working pressure ≥72 MPa.
5. Mass ≤16 kg.
Hydraulic Spreader
1. Complies with the requirements of the GB/T17906-2021 "General Technical Conditions for Hydraulic Rescue Tools" standard.
2. Rated working pressure ≥72 MPa, maximum spreading force ≥500 kN, spreading distance ≥700 mm, pulling distance ≥560 mm, maximum pulling force ≥77.5 kN.
3. Weight ≤20 kg.
Hydraulic Combination Tool (Cutter-Spreader)
1. Complies with the requirements of the GB/T17906-2021 "General Technical Conditions for Hydraulic Rescue Tools" standard.
2. Rated working pressure ≥72 MPa, spreading distance ≥300 mm, maximum cutting capacity (Q235 material) ≥ φ30 mm round steel ≥ 10 mm thick steel plate.
3. Maximum pulling force ≥60 kN, weight ≤16 kg.
Hydraulic Ram
1. Complies with the requirements of the GB/T17906-2021 "General Technical Conditions for Hydraulic Rescue Tools" standard.
2. Working pressure ≥72 MPa, minimum wedge insertion gap ≤5 mm.
3. Opening force ≥210 kN, opening distance ≥55 mm.
Hydraulic Rescue Strut
1. Complies with the requirements of the GB/T17906-2021 "General Technical Conditions for Hydraulic Rescue Tools" standard.
2. First-stage supporting force ≥200 kN, second-stage supporting force ≥120 kN.
3. First-stage supporting length ≥620 mm, second-stage supporting length ≥1000 mm.
4. Closed length ≤550 mm.
5. Mass ≤18 kg.
6. Single-interface design, operable under pressure, equipped with an automatic reset directional valve system and a latch-type anti-slip support head, capable of rotating at any angle according to the shape of the supported object.
7. Provides relevant test reports issued by national authoritative testing institutions, and