Electric Bicycle Frame Fork Vibration Testing Machine

Charging Pile Testing Equipment

Water and Dust Protection Test

Insulation Resistance Tester

Insulation Resistance Tester

Withstand Voltage Tester

Breaking Capacity and Normal Operation Test Device

Temperature Rise Tester

Flexible Cable Retention Testing Machine

Cable Pull and Twist Testing Machine

Oven

Impact Test Device

Plug and Connector Mechanical Strength Test Device

Charging Pile Gun Cable Bending Test Device

Threaded Seal Gland Test Device

Torque Test Device

Creepage Distance Test Card

Oven

Ball Pressure Test Device

Glow Wire Tester

Tracking Index Tester

Salt Spray Test Chamber

High Voltage Arc Ignition Tester

Vehicle Run-Over Test Device

Electric Bicycle
Electric Bicycle Comprehensive Tester
Electric Bicycle Braking Performance Detector

Road Test Instrument

Vehicle Tester (Simplified Road Type)

Electric Bicycle Overall Performance Tester
Electric Bicycle Frame Fork Vibration Testing Machine
Electric Vehicle Frame Impact Testing Machine
Electric Vehicle Fork Frame Drop Testing Machine
Electric Bicycle Handlebar Stem Bending Strength Test Device
Weighing Instrument

Exposed Protrusion Test Cylinder Rod

Electric Bicycle Spray Test Device

Electric Bicycle Wading Test Device

Automotive Interior Combustion Testing Machine

Oxygen Index Meter

Speed Limit Assistance Test System

I. Scope of Application:

Capable of dynamically simulating loading on electric bicycle frame/fork assemblies to conduct vibration tests. This equipment is primarily used to test the strength performance of frame/fork assemblies and is suitable for front and rear vibration testing of electric bicycle frames.

II. Test Principle:

The test sample is fixed on the testing platform according to standard test requirements, fully simulating the force conditions during electric bicycle riding. Based on standards, the test force magnitude and vibration cycles are set. After a certain number of test cycles, observe whether the frame fractures or cracks, and whether connectors and fasteners loosen. If the specimen fails during testing or reaches the specified number of cycles, the machine will automatically stop and retain the test results.

III. Compliant Standards:

GB17761-2018 "Safety Technical Specifications for Electric Bicycles";

GB 3565-2005 "Safety Requirements for Bicycles";

DIN 79100-2000 "Bicycle Safety Requirements and Test Methods";

QB/T1880-2008 "Bicycle Frames";

JIS D 9401-2010 "Bicycle Frames" Appendix: Frame Strength and Vibration Resistance for Imitation Bicycles.