Insulation Mat Technical Parameters

1. Classified by voltage resistance level

★★5kv【Insulation Mat】

Technical parameters: Thickness 3mm; Colors red, black, green; Specific gravity: 5.8KG/m2

★★15KV【Insulation Mat】

Technical parameters: Thickness 5mm; Colors red, black, green; Specific gravity: 9KG/m2

★★20KV【Insulation Mat】

Technical parameters: Thickness 6mm; Colors red, black, green; Specific gravity: 11KG/m2

★★25KVInsulation Mat

Technical parameters: Thickness 8mm; Colors red, black, green; Specific gravity: 14.5KG/m2

★★30KVInsulation Mat

Technical parameters: Thickness 10mm; Colors red, black, green; Specific gravity: 18KG/m2

★★35KVInsulation Mat

Technical parameters: Thickness 12mm; Colors red, black, green; Specific gravity: 21.6KG/m2

2. Classified by color:

◆RedInsulation Mat

◆BlackInsulation Mat

◆GreenInsulation Mat

3. Classified by thickness:

●3mm, 5mm, 6mm, 8mm, 10mm, 12mm

Insulation Mat Application Range and Storage Method

Insulation mats are widely used in substations, power plants, distribution rooms, testing laboratories, and outdoor live working operations.

They should be stored in a dry and well-ventilated environment, away from heat sources, and at least 20cm above the ground and away from walls. Avoid contamination by acids, alkalis, and oils. Do not store outdoors to prevent direct sunlight exposure.

1. Our products are made of non-polar pure rubber with excellent insulation properties, such as NR and SBR.

2. Our products do not contain inferior rubber, waste rubber, recycled rubber, or any plastic components.

3. Stable surface resistance and volume resistance, high specific gravity per unit area, good flatness, and stable physical properties.

4. Our products are resistant to acids, alkalis, oils, and high temperatures. The color schemes are elegant and aesthetically pleasing, and the power frequency withstand voltage meets national standards.

Performance of Our Insulation Mats

?No more than 5 bubbles per square centimeter, with a distance of at least 40mm between any two bubbles; no cracks.

?Elongation at break ≥250%, no deformation.

?Heat air aging at 70°C for 72 hours.

?Water absorption ≤1.5%.

?Power frequency withstand voltage RMS >15KV, no breakdown for 3 seconds.

?Smooth appearance, no unevenness, good elasticity.