Craft Liquid Mold Silicone RTV2 Condensation-Type Silicone Rubber AB Room Temperature Curing

Usage Method of Industrial-Grade Liquid Mold Silicone (Two-Component Room Temperature Vulcanizing Silicone)

Confirm Components and Ratio

Craft liquid mold silicone is typically a two-component system (Component A colloid + Component B curing agent), which must be mixed according to the manufacturer's specified ratio (common ratios are 10:1 or 1:1, refer to the product instructions for details).

Example: If the ratio of Component A (silicone) to Component B (curing agent) is 10:1, then 100g of silicone requires 10g of curing agent, with an error margin within ±5% to avoid incomplete curing or excessive brittleness.

Weigh Components A and B separately according to the ratio and pour them into a container.

First, stir manually until the color is uniform (approximately 2-3 minutes), then use an electric mixer for high-speed stirring for 1-2 minutes to ensure the curing agent is fully dispersed.

Note: Insufficient stirring may lead to localized non-curing or uneven performance; ensure no sedimentation or clumping.

For inquiries about craft liquid mold silicone, contact Ms. Chen at 13662816580