Heyuan PPA Plastic Mold Opening Production Qingxi PA66 Plastic Bevel Gear Material Customization

After years of effort, Dongguan Dinghao Plastic Technology Co., Ltd. has developed into an integrated enterprise specializing in design, production, sales, and distribution. It is one of the larger injection molding product manufacturers in the Dongguan area. "Quality assurance, customer first, continuous improvement, and pursuit of high quality" are our service principles. We consistently adhere to the quality policy of "strengthening quality management, serving society with superior quality, and improving the quality system," providing efficient, low-cost, and high-quality services to both new and existing customers, earning the trust and support of clients from various industries.

Name: Precision Plastic Gear

Model: MPT-00605

Interface Diameter: 15±0.5mm

Outer Diameter: 35±0.5mm

Height: 8±0.5mm

Total Height: 23±0.5mm

Material: PA66

Color: Yellow

Weight: 8g

Note: The above data is for reference only,

Please refer to the actual product,

Customization available with provided drawings or samples

Correct Gate Location for Plastic Mold Steel
Designers must pay special attention not only to the design calculations of plastic products but also to the gate design of the mold. Ensure the correct gate system and the number and location of the main runner are selected. The type and location of the gate can significantly impact product quality.
Gate location selection determines the following characteristics of plastic products:
1. Filling behavior;
2. Product dimensions (tolerances);
3. Shrinkage action, warpage;
4. Machine performance level;
5. Surface quality (appearance).
If the designer chooses the wrong gate, it is difficult to modify the results by optimizing processing parameters during molding. Therefore, design engineers must fully consider the gate location.