Zhongshan PAR plastic parts assembly cushioning and shock absorption   Jiangsu lighting PI66 plastic accessories also do not grow mold

Dongguan Dinghao Plastic Technology Co., Ltd. has strong product development, research, and manufacturing capabilities, with robust technical support and multiple production equipment and processes. To enhance independent R&D capabilities and keep pace with global developments, the factory also has a research and development center dedicated to advancing new technologies in plastics, rubber, hardware, and other industries, providing timely technical support and services to customers.
Dongguan Dinghao Plastic Technology Co., Ltd. always adheres to the business philosophy of "quality as life, technology as the leader, and customer satisfaction as the purpose," striving to promote the development of various industries and improve people's living environment.

Name: Fixed Decorative Panel

Model: MPT-00406

Length: 91±0.5mm

Width: 25±0.5mm

Height: 9.5±0.5mm

Thickness: 4.4±0.5mm

Material: Nylon with fiber

Color: Blue

Weight: 8.3g

Note: The above data is for reference only,

Please refer to the actual product,

Customization available with provided drawings or samples

Injection Molding Time

The injection molding time mentioned here refers to the time required for the plastic melt to fill the cavity, excluding auxiliary time such as mold opening and closing. Although the injection time is very short and has little impact on the molding cycle, adjusting the injection time plays a significant role in controlling the pressure of the gate, runner, and cavity. Reasonable injection time facilitates ideal melt filling and is crucial for improving the surface quality of the product and reducing dimensional tolerances.

Injection time is much shorter than cooling time, approximately 1/10 to 1/15 of the cooling time. This rule can serve as a basis for predicting the total molding time of plastic parts. In mold flow analysis, the injection time in the analysis results equals the injection time set in the process conditions only when the melt is entirely propelled by screw rotation to fill the cavity. If screw holding pressure switching occurs before the cavity is filled, the analysis result will be greater than the process condition setting.