LXW-1S Micro High-Speed Rotary Tube Inner Wall Spraying Machine

The LXW-1S high-speed rotary tube inner wall spraying machine features a unique structure with an outer diameter of only 24mm, allowing it to be inserted into small holes and thin tubes for inner wall painting. The spraying machine uses pneumatic conveying equipment to transport the coating to the sprayer, where the coating is centrifugally atomized by the high-speed rotation of the LXW-1S tube inner wall spraying machine's atomizing disk and sprayed onto the tube wall.

I. LXW-1S Tube Inner Wall Spraying Machine Parameters:

II. LXW-1S Tube Inner Wall Spraying Machine Atomization Form：

The LXW-1S tube inner wall spraying machine uses an aviation-grade pneumatic motor to drive the front atomizing disk at high speed, ensuring effective atomization even for high-viscosity coatings. The atomizing cap, combined with a fine stainless steel atomizing mesh, finely atomizes the coating. Since atomization relies on centrifugal force and does not require compressed air, there is minimal rebound and splashing of paint within the cavity, resulting in excellent spraying performance. This inner wall spraying machine is suitable for small-diameter tube inner wall spraying, reducing the drawbacks of uneven atomization and severe sagging common in traditional inner wall spraying machines.

III. LXW-1S Tube Inner Wall Spraying Machine Flow Rate and Switch Control Method：

The accompanying manual flow switch gun can control the coating switch and adjust the spraying flow rate (by adjusting the flow knob).

IV. LXW-1S Tube Inner Wall Spraying Machine Features：

1. The spraying machine body is only 24mm in diameter, allowing it to extend into small holes and narrow tubes for inner wall painting.

2. High-speed rotary centrifugal atomization eliminates the need for compressed air, ensuring no rebound or splashing of paint mist and excellent inner wall spraying results.

3. The atomizing cap, paired with a fine atomizing mesh featuring multiple tiny pores, ensures fine atomization of the coating.

4. Equipped with a manual switch control gun for controlling the coating switch.

5. The control gun includes a flow regulating valve for easy adjustment of coating output, suitable for thin-layer spraying.

V. LXW-1S Tube Inner Wall Spraying Machine Supporting Conveying Device

1. TYW-2L Pressure Tank：

2. The tank body is integrally molded for high safety.

3. Lightweight and easy to carry.