CYW40 Heavy-Duty Anti-Corrosion Coating Airless Sprayer
Contact Info
- Add:寶山區(qū)羅店鎮(zhèn), Zip: 201908
- Contact: 肖銀根
- Tel:13918498232
- Email:13524283219@139.com
Other Products
CYW40 Heavy-Duty Anticorrosive Coating Airless Spraying Machine
I. CYW40 Heavy-Duty Anticorrosive Coating Airless Spraying Machine Introduction:
An airless spraying machine refers to a spraying method where the main unit pressurizes the liquid material, transports it through the material hose to the nozzle, and the liquid is atomized into paint mist by the nozzle and sprayed onto the workpiece surface. Since the liquid is atomized under high pressure without the need to mix with compressed air, it differs from traditional air spraying and is therefore called airless spraying.
The main components of airless spraying equipment include the main pump, high-pressure material hose, spray gun, and nozzle. Customers can also opt for a mixer and stainless steel material bucket.
II. CYW40 Heavy-Duty Anticorrosive Coating Airless Spraying Machine Features:
1. Since compressed air is not required for atomization, the liquid material is concentrated, with minimal rebound and splatter. Compared to air spraying, it can save 30%-50% of paint.
2. The coating efficiency of airless spraying is three times higher than air spraying and over ten times higher than brush coating.
3. Airless spraying can achieve thicker coating films, reduce the number of spraying passes, improve coating efficiency, and is suitable for large-area thick coating applications.
4. During spraying, the rebound and splatter of liquid material are minimal, improving the working environment and reducing contamination for operators, making it more environmentally friendly compared to air spraying.
5. It can spray higher viscosity liquids, requiring less diluent, thereby reducing VOC emissions.
6. The pneumatic airless spraying machine uses compressed air as power, ensuring safety and explosion-proof performance. It can operate continuously for long periods without overheating and has a low maintenance rate.
III. Airless Spraying Machine Technical Parameters:
Model | Suitable Liquid | Pressure Ratio | Output Pressure | Power Air Pressure | No-Load Displacement | Gross Weight |
CYW40 | Conventional coatings, particle-containing coatings such as zinc-rich paint, etc. | 40:1 | 0~240Bar | 2~6Bar | 32L/min | Approx. 65Kg |
IV. Comparison Between Our Pneumatic Spraying Machine and Similar Products on the Market:
Shanghai Wanxiao Product Features | Similar Products on the Market |
The main unit outlet is equipped with a high-pressure stabilizing filter (can filter large particle impurities, improve coating quality, and reduce pressure pulses) | No high-pressure stabilizing filter, large pulses, prone to clogging. |
The lower cylinder and plunger undergo integral heat treatment, resulting in a longer service life. | The lower cylinder surface is chrome-plated, prone to wear. |
Reversing valve and air motor are separate, making maintenance convenient and maintenance costs low. | Reversing valve and air motor are integrated; if one part fails, the entire unit must be replaced. |
The pump has a large displacement, can accommodate large-diameter nozzles, is less prone to wear, and can spray particle-containing coatings. | Small displacement, cannot support large-diameter nozzles, prone to clogging and wear when spraying particle-containing liquids. |
V. Applicable Scope of Airless Spraying:
Construction spraying, heavy machinery spraying, petroleum and petrochemical spraying, steel structure spraying, etc.
| Industry Category | Chemicals/Paints & Coatings/Anticorrosive Coatings |
|---|---|
| Product Category | |
| Brand: | 從煜 |
| Spec: | CYW40 |
| Stock: | 999 |
| Manufacturer: | |
| Origin: | China / Shanghai / Baoshanqu |
