Inverted Bucket Steam Trap Import National StandardBX681 BX681FSeries Detailed Description:

Equipped with anti-water hammer and anti-break water seal check valve. Three years of rigorous field testing have proven its significant effectiveness in resisting water hammer and preventing water seal breakage, establishing a leading position in the industry. The top cover features an inspection port where an inspection valve can be installed; opening it immediately reveals whether the trap is functioning normally. It drips discharge under low load, intermittent discharge under medium load, and continuous discharge under full load. Different throttle orifices are available for selection, maintaining a certain drainage capacity under varying pressures. Resistant to dirt, small particle impurities are flushed out through the top throttle orifice. Non-condensable gases are discharged throughout the operation. Strong resistance to back pressure, suitable for use in recovery systems. Suitable for use with superheated steam.

Inverted Bucket Steam Trap Import National StandardBX681 BX681FSeries Structural Dimensions:

BX681 Model Dimensions Unit (MM) Operating Pressure (KG/CM2) Weight (KG)

Pressure: Max 41Kg (4.1Mpa, 600PSI) Temperature: Max 345℃ Flow Rate: 9100 KG/HRCast Steel Inverted Bucket Steam TrapBX681FSeries

Accessories can be added according to customer requirements, and parts are supplied. Parts are made of stainless steel and hardened chrome steel valve seats, wear-resistant and corrosion-resistant. Large volume, not frost-resistant. When shut down, the valve seat remains open. Must be installed upright and cannot be tilted.