Introduction to TC602 Gigabit Ethernet Tester:

The TC602 Gigabit Ethernet Tester supports up to 1G bps carrier-class Ethernet testing. It features a handheld design and is a next-generation high-speed metro and carrier Ethernet tester.

The TC602 Gigabit Ethernet and IPRAN Tester is designed for Ethernet network deployment and comprehensive testing. Compliant with Gigabit Ethernet standards, it provides Ethernet testing functions applicable to IPRAN testing. It is characterized by reliability, simplicity, and flexibility, making it an efficient testing tool for service providers to meet user Service Level Agreements (SLA).

The TC602 Gigabit Ethernet and IPRAN Tester can be widely used in any Ethernet-related testing, including performance evaluation of Ethernet by service operators, installation, activation, or maintenance of metro Ethernet/mobile backhaul, deployment of point-to-point Ethernet access services, and online fault diagnosis of real-time information flows. It also supports IPRAN service testing functions.

Features of the TC602 Gigabit Ethernet Tester:

• 5-inch touchscreen with professional and fast user UI experience

• Two 1000Base-X SFP interfaces, two 10/100/1000Base-T RJ45 interfaces

• Supports simultaneous testing on dual ports without interference

• Provides 10/100/1000M connectivity verification services, automatically identifies 10/100/1000Base-T network services, supports auto-negotiation and forced duplex mode settings for interfaces, and supports flow control response settings

• Complies with RFC 2544 standards for throughput, latency, packet jitter, frame loss, and back-to-back testing; supports customizable settings for 8 frame lengths; test results can be presented in graphs and tables

• Supports symmetric and asymmetric ITU-T Y.1564 standard testing, service configuration testing, and service performance testing; supports up to 10 services; test duration can be set as needed, with support for long-term performance testing up to 30 days

• RFC 2544 and Y.1564 testing support remote loopback mode and dual-device mode switching, making operation simple and convenient

• Supports long-term multi-flow generation and monitoring, with up to 10 data flows; each flow can be configured with source/destination MAC, source/destination IP, source/destination port number, VLAN, MPLS, and payload format; can simulate voice or video formats for transmission; supports continuous, burst, and incremental data flow transmission models

• Supports multi-data flow error testing; each flow can be individually counted for error numbers and error rates, and supports error insertion for each flow

• Supports data frame statistics by frame length, unicast, multicast, and broadcast

• Supports pause frame/interrupt frame statistics

• Supports error rate testing up to L4 layer in VLAN and MPLS environments

• Supports statistics on service interruption count and duration (including maximum, minimum, average, and total), and records the time points and duration of service interruptions

• Supports passthrough testing, monitoring bidirectional transmission rates (including current, average, maximum, and minimum rates), and frame length distribution statistics

• Supports passthrough packet capture; captured files can be exported to a PC and analyzed in detail using Wireshark software

• Supports QinQ testing for 3-layer VLAN

• Supports 3-layer MPLS testing

• Supports IPv6 protocol and jumbo frames

• Supports protocol frame testing

• Supports dual-port simultaneous loopback testing; loopback can be set up to L4 layer; different loopback levels support MAC, IP, and port number swapping for source and destination data frames

• Supports cable diagnostics, twisted-pair wire sequence, and length testing

• Supports optical power measurement

• Remote discovery function: automatically detects other TC700/TC600 series testers on the network

• Supports Ping testing, including regular Ping and fast Ping; fast Ping can send traffic at interface line rate and simultaneously count the reception rate of Ping response frames

• Supports route tracing testing to obtain the latency of each routing node between local and remote endpoints

• Supports LAN scanning function

• Supports HTTP testing for web access

• Supports Ethernet OAM testing

• Optional SCPI remote control function for remote operation and secondary development

• Supports saving test results in PDF and CSV formats; file storage modes include local storage, FTP server storage, and USB storage; PDF files support local browsing

• Supports import and export of configuration files for various test items via USB and FTP

• Supports VNC remote graphical interface sharing

• System supports bilingual Chinese and English; features include screen capture, touchscreen soft keyboard input, browser, timed shutdown, and sleep functions

• Supports signal indication functions, such as signal indicators and alarm/error indicators

• Comprehensive user data interfaces, including LAN and USB

• Built-in rechargeable lithium battery, external AC power supply, and configurable power-saving trigger time

Applications of the TC602 Gigabit Ethernet Tester:

• On-site network engineering activation testing

• Performance evaluation of Ethernet by service operators for end-to-end comprehensive testing

• PTN/IPRAN network configuration and performance testing

• Local and metro Ethernet construction, deployment, and maintenance

• Communication education and research