USB Multifunction Data Acquisition Card 12-Bit Analog Input DAQ Card
Contact Info
- Add:平谷區(qū)王辛莊鎮(zhèn)樂園路29號, Zip: 100000
- Contact: 蔡工
- Tel:15600362816
- Email:2853689777@qq.com
Other Products
Brand: Altai Technology
Model: USB3136A
Product Overview:
The USB3136A is a multifunctional data acquisition card. This board seamlessly integrates with LabVIEW and provides graphical API functions. It features 500Ksps 12-bit 16 RSE/NRSE channels or 8-channel DIFF analog input, supporting on-demand single-point sampling, finite-point sampling, and continuous sampling; 2-channel synchronous analog output; 16 programmable I/O lines; and 2 multifunctional counters.
Product Applications:
The USB3136A is primarily used in: electronic product quality testing, signal acquisition, process control, and servo control.
Features:
1. Seamless integration with LabVIEW, providing graphical API functions.
2. DMA-like USB Stream transmission technology for higher transfer efficiency and stronger real-time performance.
3. Device-side USB interface Lock method significantly reduces the probability of disconnection due to loosening.
4. Low power consumption, supports adaptive switching between USB bus power and 7~24V wide-range external power supply, facilitating mobile field measurements based on laptops.
Analog Input | Number of Channels | 16 channels (RSE, NRSE), 8 channels (DIFF) | |
Resolution | 12-bit | ||
Memory Depth | 4K point FIFO | ||
Maximum Sampling Rate | 500Ksps | ||
External Clock Range | 0~500KHz | ||
Calibration Method | Software automatic calibration | ||
Channel Scanning Mode | Asynchronous cyclic scanning | ||
Sampling Modes | On-demand single-point sampling, finite-point sampling, continuous sampling | ||
Input Ranges | ±10V, ±5V, ±2V, ±1V | ||
Maximum Working Voltage | ±12V | ||
Protection Voltage | ±25V | ||
Trigger Modes | Start trigger, reference trigger, pause trigger | ||
Trigger Types | Analog edge, analog window, digital edge | ||
Coupling Mode | DC coupling | ||
Input Impedance | 1GΩ | ||
Analog Output | Number of Channels | 2 channels | |
Resolution | 14-bit | ||
Output Range | ±10V | ||
Maximum Update Rate | 200Ksps | ||
Channel Output Mode | Synchronous output | ||
Memory Depth | 4K word (point) FIFO memory | ||
Calibration Method | Software automatic calibration | ||
Generation Modes | Single-point (on-demand) generation, finite-point generation, continuous generation | ||
Trigger Modes | Start trigger, pause trigger | ||
Trigger Types | Digital edge | ||
Digital I/O | Number of Channels | 16 Lines | Port0: 8 Lines |
Port1: 8 Lines, multiplexed with PFI0~7 | |||
Electrical Standard | TTL compatible | ||
Configuration Method | Programmable I/O direction and state | ||
Default Power-on State | User configurable | ||
Input/Output Logic Levels | High level: up to 5V, down to 3V Low level: up to 0.8V, down to 0V | ||
Single Channel Drive Capability up to | -20mA @ Source current 25mA @ Sink current | ||
Counter | Number of Channels | 2 multifunctional counters | |
Counter Bits | 32-bit | ||
Counter Functions | CI: Edge counting, frequency measurement, period measurement, half-period measurement, pulse measurement, pulse width measurement, two-edge separation measurement, position measurement (based on incremental encoder) | ||
CO: Pulse output | |||
Counter Source | PFI0~PFI7 | ||
Maximum Input Frequency | 5MHz | ||
Minimum Pulse Width | 100nS | ||
Electrical Standard | TTL level | ||
Sampling Modes | CI: On-demand single-point sampling | ||
CO: Single-point (on-demand) generation, finite-point generation, continuous generation | |||
Contact: 15600362816, 15910369641
| Industry Category | Instruments & Meters |
|---|---|
| Product Category | |
| Brand: | 阿爾泰科技 |
| Spec: | USB3136A |
| Stock: | 200 |
| Manufacturer: | |
| Origin: | China / Beijing / Pingguqu |
