Instrument for Testing Biomass Calorific Value Instrument for Testing Biomass Calorific Value Hebi Biaochuang Instrument Manufacturing Co., Ltd. Biomass Fuel Testing Instrument Biomass Pellet Testing Equipment

Parameters:
Power: 100W.
Testing Accuracy: Complies with national standards.
Testing Range: 30 kcal calorific value – 13,000 kcal calorific value.
Operating Environment Temperature: 2°C – 42°C.
Control Method: Fully automatic.
Display Method: Chinese characters.
Single Sample Testing Time: 15 minutes.
Temperature Measurement Range: 0°C ~ 65°C
Temperature Measurement Resolution: 0.0001°C
Sample Quantity: 0.8g ~ 1.1g
Power Supply: AC220V±10%, 50HZ
Heat Capacity (Water Equivalent): Approximately 10,500 J/K (equivalent to 2,500 cal/K)

The calorific value of the tested material is transmitted through the oxygen bomb wall into 2,000 milliliters of water. The stirring device on the machine mixes the water temperature evenly at a speed of no less than 460 revolutions per minute. Then, a temperature detection device with a sensitivity of one ten-thousandth transmits the calorific value to the [Pellet Calorific Value Detection Program Calculation Chip], thereby calculating the calorific value data of straw pellets in kilocalories.

The main unit consists of an outer cylinder and an inner cylinder, creating the required experimental environment to prevent heat exchange. The outer cylinder cover is equipped with a temperature sensor, ignition wires, stirrer, etc. Oxygen Bomb: Withstands the high pressure generated during solid combustion (60-70 atmospheres) and can endure even greater pressure from liquid fuels. Oxygen Filling Device: Used to deliver oxygen into the oxygen bomb.