New Version Fully Automatic Industrial Analysis New Version Fully Automatic Industrial Analysis Hebi Biaochuang Instrument Manufacturing Co., Ltd. Microcomputer Fully Automatic Industrial Analyzer Computer Automatic Industrial Analyzer Dual Furnace Industrial Analyzer Intelligent Industrial Analyzer Coal Industrial Analyzer Fully Automatic Coal Quality Industrial Analyzer

I. Preparation before the experiment:

1. Prepare the test sample.

2. Prepare the crucible (wiped clean).

3. Turn on the main power switch.

4. Open the "Industrial Analysis" program on the computer.

II. Weighing process:

1. Click "Start Experiment" (moisture, ash in water, ash in the operation box, volatile matter in the volatile matter operation box).

2. The instrument automatically weighs the mass of the first crucible and moves to the second crucible position.

3. Enter the number, click "Confirm", weigh the empty crucible mass, add the sample, click "Confirm", add or reduce the sample (prompt too much or too little sample), place the crucible, click confirm.

4. Repeat the process, after weighing all samples, click "End Weighing".

III. Moisture experiment process

1. Dry the sample according to the set time and temperature, when the drying time is up, weigh the sample mass to calculate moisture.

2. Check for dryness for 30 minutes, when the time is up, weigh the sample mass to calculate moisture.

IV. Ash experiment process

1. Burn the sample according to the set time and temperature, when the burning time is up, weigh the sample mass to calculate ash.

2. Check for dryness for 20 minutes, when the time is up, weigh the sample mass to calculate ash.

V. Volatile matter experiment process

1. Burn the sample according to the set time and temperature.

2. Wait for the crucible to cool down, weigh the sample mass to calculate volatile matter.

VI. Data saving and printing

1. After the measurement is completed, press "Save" or "Print" to save the measurement data or print the corresponding data as prompted.

VII. Shutdown:

1. After exiting the operating system, turn off the main unit, computer, and printer power in sequence.

I. Standards adopted by the Microcomputer Fully Automatic Industrial Analyzer (Dual Furnace)

GB/T 483-2007 "General Rules for Analytical Methods of Coal"
GB/T 212-2008 "Proximate Analysis of Coal"
GB/T 2001-1991 "Method for Determination of Proximate Analysis of Coke"

II. Features of the Microcomputer Fully Automatic Industrial Analyzer (Dual Furnace)
1. Highly automated: After placing the sample, just click the mouse to automatically complete the test and print the results, simple operation.
2. Accurate testing: After testing more than twenty standard coal samples, the results are all accurate; compared with the national standard method, the test accuracy meets the requirements. The GF-8000 model uses a two-body structure, with volatile matter testing as a separate part of the instrument, and the other part testing moisture and ash, the test results are better than the national standard requirements.

3. High efficiency:

Fast method: Moisture, ash, volatile matter for 19 samples ≤120min (8000 model)
≤180min (6000 model)
Classic method: Moisture for 19 samples (dryness check), ash (slow ash + dryness check) 260min, volatile matter 120min (8000 model)

4. The three indicators of moisture, ash, and volatile matter can be measured in any combination or separately.
5. Uses imported integrated furnace, fast heating, energy saving, short testing time.

6. Uses imported electronic balance, imported stepper motor, ensuring stable testing performance.