FTGP-3 Rail Straightness Measuring Instrument

I. Instrument Overview:

The rail straightness measuring instrument uses non-contact laser sensors for measurement, capable of assessing smoothness in both vertical and horizontal directions. It is suitable for measuring the smoothness of rail weld repairs, joints, and insulated rail joints, and can also evaluate the wear on the vertical surface of the rail. During measurement, the overlapping method can be employed, allowing the measurement length for rail wear to exceed the device's own length. It is applicable for evaluating rail wear in both short-distance waveform ranges (0.03-0.3 meters) and long-distance waveform ranges (0.3-1 meter, 1-3 meters, 10 meters).

II. Product Compliance Standards:

TB/T3235-2010 General Technical Conditions for Railway-Specific Geometrical Measuring Instruments;

JJG (Railway) 167-2011 Verification Regulation for Rail Straightness Measuring Instruments.

III. Product Applications

1. Detecting short-wave irregularities on the rail top surface;

2. Detecting short-wave irregularities on the rail working edge;

3. Inspecting the quality of rail welding joints, factory welds, and on-site welds;

4. Guiding welding joint repairs based on waveform diagrams, enabling targeted grinding to improve work efficiency.

IV. Technical Specifications

1. Basic measurement length: 1m;

2. Measurement time: 15s per measurement;

3. Measurement accuracy: ±0.05mm;

4. Number of measurement points: 1000 points/meter;

5. Measurement range: -2.5 to 1.5mm (from the average line);

6. Measurement principle: Laser measurement, photoelectric imaging principle;

7. Laser wavelength: 650nm;

8. Memory capacity: ≥10,000 welding profiles;

9. Battery capacity: >1000 measurements.