Xiangye Production Point-Type Fluidizer Fluidizing Nozzle. The following outlines the core technical points and application specifications for tank point-type fluidizers (fluidizing nozzles), integrating industrial design standards and practical operational requirements:
 ?1. Core Functions and Working Principles?
Eliminate Material Caking?
Compressed air is dispersed into micro airflows through sintered stainless steel mesh (aperture ≤15μm), penetrating the pulverized coal layer to create a "pseudo-fluid" state, eliminating cone hanging and arching issues, ensuring continuous flow of pulverized coal.?

Reduce System Resistance?
Utilizing an irreversible nozzle design, the startup pressure is only 0.05MPa, reducing pressure loss by over 80% (compared to traditional structures at approximately 0.25MPa).?
Prevent Gas-Powder Backflow?
The unidirectional fluidizing plate structure blocks the reverse infiltration of pulverized coal into the gas path, avoiding pipeline clogging and valve wear.?

 ?2. Key Structural Design Parameters?
Item? ?Specification?
Material? 304/316L sintered stainless steel mesh (temperature resistance 300°C)?
Installation Position? 30° inclined surface at the lower edge of the blowing tank cone (covering dead zones)?
Interface Standard? DN50-DN150 flange (PN1.6/2.5MPa)?
Layout Density? 3-5 fluidizing points per square meter of conical surface?
Gas Source Requirements? Dry compressed air/nitrogen (dew point ≤-40°C)?