Exterior Wall Waterproof Transparent Adhesive Product Introduction

1. Colorless, transparent, will not damage the original wall decoration effect after application, and will not yellow or collect dust;

　　2. Heat resistant, UV resistant, ozone resistant, acid and alkali resistant, with a wide range of adaptability to temperature; blended with synthetic rubber emulsion modifier, surfactant;

　　3. The coating film has good film-forming properties, is soft and tough, and can withstand the stress caused by base layer deformation and cracking;

　　4. Uses water as the dispersion medium, non-flammable, non-toxic, odorless, does not pollute the environment, and is an environmentally friendly product;

　　5. Cold application, safe operation, convenient construction, can be directly sprayed, painted, brushed, or scraped onto the wall;

　　6. The film has microporous breathability, suitable for the thermal evaporation of humid climates in the south, and does not blister;

　　7. Low usage, cost-effective.

Scope of Application

1. Waterproof repair for leakage on the exterior walls of various buildings;

　　2. Applied to waterproof treatment at the interfaces of various decorative materials;

3. Waterproof and moisture-proof treatment on the surfaces of various interior and exterior wall decorative materials.

Construction Requirements

　　1. Base surface cleaning: use cleaner, steel wire brush, cloth to clean the wall base as thoroughly as possible, but try not to damage the original surface gloss;

2. Use a brush to apply the transparent waterproof adhesive to the wall and the joints of decorative tiles, applying with special care;

3. Generally, apply 2-3 coats. Ensure the previous coat is dry and not sticky before applying the next, and apply in crisscross directions;

4. If the viscosity is too high during construction, dilute with clean water, but use as little water as possible.

Technical Indicators