Coating Engineering ~ Coating Application [Supplies to Sichuan, Chengdu, Yunnan, etc.] - Guanpai Paint Factory; Paint Sales Manager Sun 152^0825^6966; The core purpose of anti-corrosion coating application is to form a dense protective layer through painting, isolating the metal substrate from corrosive environments (such as moisture, oxygen, chemicals, etc.), thereby achieving rust prevention, corrosion resistance, and extending service life.

The construction process can be summarized into three key stages:

Stage One: Surface Preparation
"Seven parts preparation, three parts coating"—the quality of surface preparation directly determines the success of anti-corrosion effectiveness.
Cleaning: Thoroughly remove oil stains, dust, salt, and other impurities from the metal surface.
Rust Removal: Loose scale and rust must be completely removed. Common methods include:
Tool Rust Removal: Using wire brushes, sandpaper, angle grinders, and other tools for grinding.
Sandblasting Rust Removal: An effective method that uses high-speed sand particles to impact the surface, achieving a very clean and slightly rough surface, greatly enhancing coating adhesion.
Goal: Expose the natural metal color, with a clean, dry, and uncontaminated surface.

Stage Two: Coating Application
Material Selection and Compatibility: Choose suitable anti-corrosion primers, intermediate coats, and topcoats based on the corrosive environment (e.g., indoor, outdoor, chemical, marine).
Mixing and Stirring: Especially for two-component coatings, the main agent and curing agent must be mixed strictly according to the ratio and stirred thoroughly.
Application: Methods include brushing, rolling, or spraying. Note:
Primer: Good adhesion and strong rust prevention capability, forming the foundation.
Intermediate Coat/Topcoat: Functions to thicken the coating and resist external erosion.
Coating Intervals: The next coat must be applied only after the previous one has surface-dried.
Goal: Achieve a uniform, continuous coating without missed spots, meeting the designed film thickness.

Stage Three: Inspection and Curing
Inspection: Check if the paint film is smooth, free from sagging, pinholes, and other defects, and use a thickness gauge to verify if the dry film thickness meets standards.
Curing and Maintenance: After coating is completed, the coating must fully cure under specified temperature conditions before being put into service.