I. Purpose

Mainly used for crushing various types of sheet glass. It is suitable for the waste glass recycling and crushing section in the glass industry, such as CRT glass factories and glass bottle factories.

II. Technical Parameters

Roller diameter φ470mm Roller length 882mm

Processing capacity 30t/h Hardness after hardfacing HRC50-55

Roller ZG65Mn Main shaft speed 147r/min

Feed particle size (sheet) ≤ width 300mm Discharge particle size (sheet) ≤ width 50mm

Reduction motor: 11KW*2 units

SEW  Secondary energy efficiency Hydraulic coupling YOX  360

III. Working Principle:

The working principle of this machine is to subject the material falling between the two toothed rollers to extrusion under the relative rotational action of the two rollers, thereby obtaining the required particle size.

IV. Machine Structure:

1. Frame: The frame consists of components such as side plates, side panels, bearing supports, guard plates, and edge guard plates.

2. Roller part: Mainly composed of components such as the shaft, square cylinder, toothed plate, bearings, bearing housing, and sprocket.

3. Sprocket box part: The main function is to enclose the chain drive in a sealed box, store lubricating oil, ensure it is unaffected by external factors, and maintain good lubrication.

4. Transmission part: Composed of main components such as the motor, reducer, coupling, and transmission base plate.

5. Tensioning device: Consists of the adjusting screw, tensioning slide base, and sprocket.