I. Purpose and Features

The TD/TH type belt bucket elevator (hereinafter referred to as this machine) is a new product designed by our company. The main structural parameters of this machine comply with JB3926-1899 Vertical Bucket Elevator (this standard is equivalent to and adopts international and foreign advanced standards). The traction component uses a high-strength polyester rubber conveyor belt, employing the "digging method" for loading and "centrifugal" and mixed methods for unloading.
This machine is suitable for powdery, granular, and small lump materials with a bulk density not exceeding 1.5 tons/m3, such as coal, cement, sand, grain, etc., which are non-abrasive or semi-abrasive. The general material temperature should not exceed 60°C; if heat-resistant belts are used, the material temperature should not exceed 120°C.

II. This machine mainly consists of the following parts:

1. Transmission device
2. Upper section
3. Middle casing
4. Belt and buckets
5. Lower tension drum
6. Lower casing
7. Feed inlet
8. Screw tensioning device

III. Product Parameters:

Power: 5.5KW
Reducer motor brand: SEW
Conveying capacity: 76 m3/h
Chain material: 20MnV
Bucket material: NM500
Feed and discharge port lining: Ultra-high molecular weight polyethylene plate 10mm
Casing steel plate thickness: 6mm