Product Features
· Water-based eco-friendly product, compliant with international standards, low VOC.
· Dense paint film, strong adhesion, excellent mechanical properties.
· Good chemical and solvent resistance.
· Excellent water and corrosion resistance.

Product Applications
Anti-corrosion and anti-rust surface coating for steel and structural components in moderately corrosive environments.
Anti-corrosion coating protection for cement products.

Application Sites
Building bridge steel structures
Mechanical equipment
Containers
Locomotive parts
Petrochemical pipelines

Packaging Specifications
Component A: 12kg tinplate bucket
Component B: 11kg plastic can

Application Instructions
Surface Treatment: The surface coated with primer or intermediate layers must be clean and dry. Remove surface contaminants with appropriate detergents and high-pressure fresh water. For old epoxy or polyurethane paint films, roughen the surface before application.
Thinner: Use deionized water or qualified tap water as thinner.
　　　　　 Thinner dosage: Airless spraying: below 10% (of original paint mass)
　　　　　　　　　　　 Air spraying: below 20% (of original paint mass)
　　　　　　　　　　　 Brush coating: below 20% (of original paint mass)
　　　　　　　　　　　 Roller coating: below 20% (of original paint mass)

Application Methods: Airless spraying, air spraying, brush coating, roller coating (specialized)

Usage Method: Stir Component A thoroughly, add the required amount of Component B as specified, and mix well. Add an appropriate amount of thinner according to the application method, stir evenly, and then apply. After mixing Components A and B, use within the pot life.

Precautions
It is recommended to use the product in dry and sunny weather or under good application conditions and environment.
Application temperature above 10°C, relative humidity below 70%, air velocity above 0.5 m/s.
Do not use excessive thinner; over-dilution may compromise the stability and performance of the paint.
Use the mixed paint within the pot life corresponding to the temperature; quality assurance decreases after expiration.
After applying water-based paint, ensure sufficient air-drying time under normal temperature. Avoid exposure to water, steam, mist, etc., during this period, as it may affect quality and performance.