I. Purpose of the 30-ton Microcomputer-Controlled Fully Automatic Cement Compression Testing Machine

This machine is manufactured in accordance with the test requirements of JC/T960-2022 "Automatic Compression Testing Machine for Cement Mortar Strength." It adopts microcomputer control and features control modes such as constant test force, constant stress, and test force holding with dual-station test space. The computer system enables functions including on-screen display of test data and curves, disk storage, and database management. When connected to a printer, it can output test data reports. The product is characterized by high precision, high reliability, and ease of operation.

 II. Main Technical Parameters of the 30-ton Microcomputer-Controlled Fully Automatic Cement Compression Testing Machine

Test Force Measurement Range: 0–300 kN

Applied Test Force Error: ±0.5%

Input Voltage: 380 V

Motor Power: 0.75 kW

Overall Dimensions (mm): 1220 × 510 × 1280 mm

Host Weight: 300 kg

III. Installation of the 30-ton Microcomputer-Controlled Fully Automatic Cement Compression Testing Machine

    During installation, ensure the testing machine is level (levelness ≤0.2/1000). Use a 0.1/1000 frame level to measure the plane of the lower platen. If the horizontal or vertical level exceeds the specified value, adjust by placing shims under the base plate and then tighten the anchor bolts.

Then connect the power cable. The electrical system of this machine should be equipped with a grounding safety protection device. The power voltage fluctuation should not exceed ±10% of the rated value.