Integrated molded aluminum alloy material, with an internal stainless steel core, high strength, medium brightness and lightweight, surface anodized (hardness HW) 14 degrees, weight per meter <1.5Kg.

Product Introduction

1. The device consists of aluminum-clad steel aluminum alloy guide rails, stainless steel core, end anti-drop device,轉向器, connecting fittings, fall arrester, and fixing fittings. All components undergo anti-corrosion treatment to ensure a lifespan equivalent to that of the tower.
2. The device is suitable for all types of towers and can effectively lock at any part of the tower where the guide rail is installed.
3. The device adopts a built-in guide rail structure, resistant to rust, pollution, easy to maintain, simple and lightweight structure, with each meter of guide rail weighing no more than 1.5kg. The guide rails are connected using male-female core holes for easy alignment and installation. The surface roughness of the guide rail is no greater than 6.3, and the cross-sectional structural deviation is less than 0.5mm.
4. The device can carry a total mass of 100kg for the operator and carried items. Tower climbers wear a safety harness with a緩沖包. In the event of a fall, the impact force on the person is below 6kN, and the device does not fail.
5. The guide rail can withstand a static load of 15kN without any structural damage.
6. The fall arrester is lightweight (0.6kg) with a designed service life of 5 years. It features one-way locking when passing through vertical, inclined, and curved guide rails, and bidirectional free sliding on horizontal guide rails. It does not lose its locking function upon impact and can resume normal operation after unlocking.
7. The fall arrester can withstand a static load of no less than 15kN and an impact load of no less than 100kg. When using the fall arrester, the fall distance is short (not exceeding 1.0m), the locking distance of the fall arrester is no more than 0.1m, and it avoids inertial locking.
8. Removing or installing the fall arrester on the guide rail requires two manual operations. The fit clearance between the guide rail and the fall arrester is tight (not more than 2mm), and the fall arrester surface has a clear usage (arrow) direction. Product features: moderately hard lightweight aluminum alloy guide rail with an internal stainless steel core, suitable for all tower types, vertical and horizontal directions, 360-degree smooth transition, providing fall protection for personnel throughout the entire tower climbing process.