The Laser Negative Ion Intelligent Water Processor is specifically designed for central air conditioning water systems, industrial cooling water systems, industrial circulating water systems, and heat exchange systems. Phenomena such as corrosion, scaling, sludge, and microbial growth in various industrial water systems are primarily caused by the continuous deterioration of water quality during circulation. According to the national standard GB50050-1995 "Design Code for Industrial Circulating Cooling Water Treatment," the following requirements are stipulated: - The system corrosion rate must be less than 0.125 mm/year. - Suspended solids or turbidity should not exceed 10-20 mg/L. - Total iron content must be less than 0.5 mg/L. The Laser Negative Ion Intelligent Water Processor fully meets all three of these requirements. Only with clear cooling water, refrigerant water, and heat exchange water systems can the normal operation of equipment be fully ensured. Working Principle: This device consists of two parts: the main unit and the auxiliary unit. The main unit generates laser electrical signals and control signals, while the auxiliary unit contains a natural mineral filtration layer that effectively removes iron and suspended solids (reducing turbidity). Additionally, the device is equipped with a cathodic protection electrode to safeguard both the equipment and the water system, fundamentally inhibiting corrosion. With the use of this device, visible improvements in water quality can be observed. Chemical analysis will show reductions in suspended solids and iron ion levels. For systems with severe rust issues, immediate effects are noticeable after installation. Within 7-15 days, an "active iron filtration membrane" forms, ensuring long-term and stable purification functionality.