Dongguan Xiangdu Electromechanical Co., Ltd. includes at least one full roller slider, one guide rail, built-in end elastic scrapers, slider bottom sealing strips, and plastic filler pieces. The linear recirculating roller bearing and guide rail assembly's slider and guide rail are standard-matched to each other. Due to their identical tolerance preload, after consultation, there is a possibility of using sliders and guide rails from different groups. The linear recirculating roller bearing and guide rail assembly can achieve accelerations of up to 100 m/s2, speeds of up to 180 m/min, and operating temperatures from –10 °C to +100 °C. It is applied in unlimited travel, very high load, and very high rigidity applications. These units also offer optimized noise designs that achieve X-life quality as an option. Ball-type single guide rail system Six-row linear recirculating ball bearing and guide rail assembly The six-row linear recirculating ball bearing and guide rail assembly KUSE offers high load capacity and rigidity among ball rolling element linear guides. It includes at least one full ball slider, one guide rail, built-in end elastic scrapers, slider bottom sealing strips, and plastic filler pieces. The linear recirculating ball bearing and guide rail assembly KUSE can withstand accelerations of up to 150 m/s2, speeds of up to 300 m/min, and operating temperatures from –10 °C to +100 °C. It is suitable for unlimited travel, very high load, and very high rigidity applications. Six-row linear recirculating ball bearing and guide rail assembly Four-row linear recirculating ball bearing and guide rail assembly KUVE is the most widely used and diverse guide rail system in INA guide rails. It includes at least one fully loaded slider, one rail, built-in elastic scrapers at the slider ends, slider bottom sealing strips, and plastic filler pieces. The linear recirculating ball bearing and guide rail assembly KUVE can withstand accelerations of up to 150 m/s2, speeds of up to 300 m/min, and operating temperatures from –10 °C to +100 °C. It is suitable for unlimited travel, high load, and high rigidity applications. This guide rail system also offers an optimized noise design with X-life quality as an option. Two-row linear recirculating ball bearing and guide rail assembly The two-row linear recirculating ball bearing and guide rail assembly is a linear system that meets economical medium load requirements. It includes at least one fully loaded slider, one rail, built-in elastic scrapers at the slider ends, slider bottom sealing strips, and plastic filler pieces. The linear recirculating ball bearing and guide rail assembly can withstand accelerations of up to 150 m/s2, speeds of up to 180 m/min, and operating temperatures from –10 °C to +100 °C. It is suitable for unlimited travel, medium load, good rigidity, and low friction applications. Linear guidance systems are compact, highly rigid, and have high load capacity, based on standard complete units with balls or rollers. These guidance systems can support forces in all directions—except the direction of motion—and torque around all axes. There are various accuracy and preload grades to meet the guidance requirements of different applications. Linear guidance systems are also part of a modular system, for example, guide rails can be combined with all sliders of the same size. This means more economical inventory, simpler installation, and easier replacement. To reduce maintenance costs, the guide rail system has built-in lubrication storage pockets. The full sealing of the slider isolates the rolling elements from contamination in the application environment. Roller-type single guide rail system Due to the use of cylindrical rollers, the linear recirculating roller bearing and guide rail assembly RUE offers high load capacity and high rigidity among INA linear guide systems. 

 Germany INA; INA-KWVES type, KWVESN type, KWVEH type sliders, TKVD type guide rails［Square type sliders］ KWVE15S, KWVE20S, KWVE25S, KWVE30S, KWVE35S, KWVE45S, slider models, KWVE20SN, KWVE25SN, KWVE30SN, KWVE35SN, KWVE45SN, slider models, KWVE25H, KWVE30H, KWVE35H, KWVE45H, slider models, KUVE15S, KUVE20S, KUVE25S, KUVE30S, KUVE35S, KUVE45S, combination models, KUVE20SN, KUVE25SN, KUVE30SN, KUVE35SN, KUVE45SN, combination models, KUVE25H, KUVE30H, KUVE35H, KUVE45H, combination models, TKVD15, TKVD20, TKVD25, TKVD30, TKVD35, TKVD45, guide rail models, RUE-D-FE standard series flange type, grease lubrication, corrosion-resistant design　 RUE-D-OE standard series flange type, oil lubrication, corrosion-resistant design RUE-D-L-FE long series flange type, grease lubrication, corrosion-resistant design RUE-D-L-OE long series flange type, oil lubrication, corrosion-resistant design　 RUE-D-H-FE high narrow series square type, grease lubrication, corrosion-resistant design　 RUE-D-H-OE high narrow series square type, oil lubrication, corrosion-resistant design　 RUE-D-HL-FE high narrow long series square type, grease lubrication, corrosion-resistant design　 RUE-D-HL-OE high narrow long series square type, oil lubrication, corrosion-resistant design　 RUE-E full roller recirculation system standard series flange type, oil or grease lubrication, corrosion-resistant design　 RUE-E-L full roller recirculation system long series flange type, oil or grease lubrication, corrosion-resistant design　 RUE-E-H full roller recirculation system high narrow series square type, oil or grease lubrication, corrosion-resistant design　 RUE-E-HL full roller recirculation system high narrow long series square type, oil or grease lubrication, corrosion-resistant designRUE-E-KT-L chain guide long series flange type, oil or grease lubrication, corrosion-resistant design　 RUE-E-KT-HL chain guide high narrow long series square type, oil or grease lubrication, corrosion-resistant design　 INA (Ball type) INA Ball monorail guidance systems characteristics KWVE four rows; corrosion-resistant design　 KWVEB four rows; corrosion-resistant design　 KWVEBKT with square shims, four rows, corrosion-resistant design　 KWSE-- standard series, six rows; corrosion-resistant design KWSE-L long series, six rows; corrosion-resistant design KWSE-H high narrow series, six rows; corrosion-resistant design KWSE-HL high narrow long series, six rows; corrosion-resistant design KWE standard series flange type, two rows, corrosion-resistant design KWE-H high narrow series square type, two rows, corrosion-resistant design INA (Miniature Ball type) INA Miniature Ball monorail guidance systems characteristics KUME-C standard, corrosion-resistant, four rows KWEM／TKDM standard, corrosion-resistant, two rows KWEM-L／TKDM long, corrosion-resistant, two rows KWEM-C／TKDM short, corrosion-resistant, two rows KWEM-W／TKDM-W wide, corrosion-resistant, two rows KWEM-WL／TKDM-W wide long, corrosion-resistant, two rows KWEM-WC／TKDM-W wide, corrosion-resistant, two rows. 

 Products are widely used in various lathes, grinders, machine tools, spraying equipment, CNC machine tools, machining centers, measuring instruments, precision testing instruments, electronics, automated machinery, textile machinery, automotive, food machinery, medical equipment, printing machinery, packaging machinery, woodworking machinery, and many other fields.