KS-51DH Glow Wire Test Apparatus
Contact Info
- Add:上海市奉賢區(qū)南橋鎮(zhèn)萬賓路235號1號樓, Zip:
- Contact: 魯麗
- Tel:13916948217
- Email:ks_shanghai@163.com
Other Products
I. PRODUCT INTRODUCTION
Product Introduction
| Product Model | KS-51DH | Thermocouple | Imported K-type Armored Thermocouple |
| Product Use | Determine the ignition temperature and flame resistance index of insulating materials | Temperature Sensing Delay | 1.7s |
| Execution Standard | GB/T5169.10, IEC60695, GB/T4706 | Temperature Range | 0~1100℃ |
| Control Method | Touch Screen + PLC Programming | Temperature Calibration | 960±15℃ |
| Glow Wire Head | Nickel/Chromium (77%Ni/20±1%Cr) | Automatic Separation | Automatically separates from the glow wire after the specimen reaches the specified time |
| Carriage Speed | Approximately 13mm/s | Ignition Bedding | Pine board, tissue paper |
| Specimen Pressure | 0.95N~1.05N | Heating Current | Above 120A |
| Pressure Limit Depth | 7mm | Specimen Distance from Enclosure | >120mm |
| Background Color | Dark Black | Enclosure Dimensions | 1120*520*1250（mm） |
| Light Exposure | <20lx | Test Power Supply | C220V, 50Hz |
II. PRODUCT CHARACTERISTICS
Product Features
1. This testing machine is an upgraded version developed based on the basic model KS-51D Glow Wire Tester, meeting the customer's need for one-click convenience.
2. Capable of storing, reviewing, and printing test reports.
3. Can be equipped with a smoke exhaust purifier (optional).
4. Suitable for multiple industries (electrical and electronic, household appliances, testing institutions).
III. PRECAUTIONS FOR USE
Usage Precautions
A.Equipment Preparation
Before using the glow wire tester, ensure the equipment is in proper condition. Check the following points:
1. Whether the equipment power supply is normal.
2. Whether the switches on the control panel are turned off.
3. Whether the glow wire is clean.
4. If the glow wire needs to be replaced, use the correct model.
B. Experimental Operation
When performing experimental operations, adhere to the following precautions:
1. The glow wire tester requires a heating period to reach a stable state. Wait for the equipment to preheat before starting the test.
2. Before testing, calibrate the length and diameter of the glow wire. This operation must be performed by the instrument operator.
3. Ensure the material sample to be tested is thoroughly dry. Damp samples may affect the accuracy of test results.
4. After the test begins, wait sufficient time for the glow wire and sample to balance before conducting the test. This process requires the instrument operator.
5. After the experimental operation is completed, promptly turn off the glow wire tester and remove the test sample.
C. Safe Operation
When performing experimental operations, pay special attention to the following safety measures:
1. Before operating the experiment, wear appropriate personal protective equipment, such as gloves, goggles, etc.
2. During the experiment, do not get too close to the equipment.
3. The power plug interface should be on a dry surface and kept clean and dry.
4. Avoid high ambient temperatures or humidity to prevent affecting the normal operation of the equipment.
5. Do not disassemble or move the instrument arbitrarily during use.
IV. LIST OF GOODS
Equipment Factory Packing List
|
Serial Number |
Name |
Unit |
Quantity |
|
1 |
Instruction Manual |
Copy |
1 |
|
2 |
Glow Wire Tester |
Unit |
1 |
|
3 |
Sample Tray |
Piece |
1 |
|
4 |
Pine Board |
Copy |
1 |
|
5 |
Stainless Steel Gauge |
Piece |
1 |
|
6 |
Smoke Exhaust Pipe |
Piece |
1 |
|
7 |
Power Cord |
Piece |
1 |
|
8 |
Imported Glow Wire Head |
Piece |
1 |
|
9 |
1.0mm Thermocouple |
Strip |
1 |
|
10 |
Tissue Paper |
Copy |
1 |
|
Optional Components (additional charge required, purchased separately) |
| Industry Category | |
|---|---|
| Product Category | |
| Brand: | 今森 |
| Spec: | KS-51DH |
| Stock: | 10000 |
| Manufacturer: | |
| Origin: | China / Shanghai / Fengxianqu |
