Supply of JinHong JH High-Quality Silicon Carbide Desulfurization Nozzles Spiral Nozzle The silicon carbide spiral nozzle is one of the most distinctive among many nozzles. As the spiral body continuously tapers, the slurry is repeatedly cut and collided along the spiral lines, changing direction and forming a sheet-like spray into a concentric conical shape. The liquid encounters no obstruction from the inlet to the outlet of the nozzle cavity. It maintains high absorption efficiency even at very low operating pressures, earning widespread recognition in desulfurization systems. The silicon carbide high-flow nozzle, also known as the reaction-sintered silicon carbide desulfurization nozzle, is a key component in thermal power plants, large boilers, and complete sets of desulfurization and dust removal equipment. Domestically produced reaction-sintered silicon carbide desulfurization and dust removal nozzles are gradually replacing imported products, offering excellent properties such as high strength, high hardness, resistance to strong corrosion, severe wear, and high temperatures, with an ultra-long service life under harsh conditions. Double Hollow Cone Tangential Nozzle Silicon carbide nozzle is a new ceramic material characterized by high-temperature resistance, slow reaction, high strength, resistance to extreme cold and heat, excellent thermal shock resistance, minimal high-temperature shrinkage, good thermal conductivity, wear resistance, and corrosion resistance. Silicon carbide nozzles are used in power plant desulfurization to remove sulfur dioxide and other pollutants from flue gas. Both coal-fired power plants and integrated gasification combined cycle systems share a common task: desulfurization and denitrification (as well as dust removal). Flue gas emitted from power plants without desulfurization and denitrification directly pollutes the atmosphere, while untreated gas in combined cycles can damage the hot-end components of gas turbines, and its exhaust also pollutes the environment. Components made from silicon carbide are increasingly used in power generation, papermaking, petroleum, chemical industry, mechanical seals, water pumps, surface treatment, heat exchange, mineral processing, aerospace, and other fields. The double hollow cone tangential nozzle, used in desulfurization towers, features one nozzle spraying upward and another spraying downward to ensure uniform spray distribution. It can also be designed with different liquid flow rates for the upper and lower spray holes, such as 80% upward and 20% downward. Hollow Cone Tangential Nozzle Limestone slurry enters the vortex chamber of the nozzle tangentially and is ejected from the spray hole at a right angle to the inlet direction. The nozzle is integrally formed by injection molding with no internal separation parts. The free-passing particle size inside the nozzle is about 80% of the spray hole size, offering high standards, multiple angles, and flow rate options. It possesses excellent properties such as high strength, high hardness, resistance to strong corrosion, severe wear, and high temperatures, with an ultra-long service life under harsh conditions. Silicon carbide nozzles are used in power plant desulfurization to remove sulfur dioxide and other pollutants from flue gas. Both coal-fired power plants and integrated gasification combined cycle systems share a common task: desulfurization and denitrification (as well as dust removal). Flue gas emitted from power plants without desulfurization and denitrification directly pollutes the atmosphere, while untreated gas in combined cycles can damage the hot-end components of gas turbines, and its exhaust also pollutes the environment.