Basic parameters:

Reaction sites: 10 groups (the 11th is a blank temperature measurement point)

Reaction container: 20mL (round-bottom, small tube diameter, thick-walled, glass reaction tube)

Applicable volume: 1-5mL (sealed tube, lighting), 1-10mL (room temperature, heating, lighting)

Applicable reactions: stirring reaction, heating reaction, sealed tube reaction, anhydrous and oxygen-free reaction

High-temperature parameters:

Heating unit: intelligent safety heater (configured with German IKA RCT main heater)

Temperature control unit: precision intelligent probe (configured with German IKA ETS-D5 precision probe)

Temperature control technology: internal temperature control + parallel temperature control + electronic dual temperature control

Independent temperature zones: 1 temperature control zone (heating module is standard)

Heating range: RT-220°C

Heating efficiency: 5-8°C/min (10 groups of 5mL ethanol, 20-100°C)

Temperature control accuracy: ±0.5°C (high-temperature mode)

Parallel accuracy: ±0.5°C (high-temperature mode)

Sealed tube experiment: yes (true sealed tube, zero reflux sealed tube)

Overnight experiment: yes (overnight temperature ≤120°C)

Cooling and temperature reduction: yes (requires external cooling circulation, panel-integrated float water flow meter)

Reflux parameters: if equipped with "reflux module" (not configured)

Reflux experiment: standard condenser reflux module (enables photocatalytic under reflux)

Reflux experiment: yes (reflux efficiency ≥98%, ethanol loss rate ≤2% when heated and refluxed at 80°C for 48h)

Low-temperature parameters: if equipped with "low-temperature module" (not configured)

Low-temperature experiment: standard low-temperature module

Cooling method: can be connected to an external circulation chiller

Low-temperature range: can reach as low as -20°C (depending on the external circulation chiller)

Temperature control difference: ±1°C (depending on the self-provided external circulation chiller)

Pressure parameters: if equipped with "pressure function" (not configured)

Gas addition experiment: standard pressure-resistant components (enables photocatalytic reaction under low pressure)

Gas addition method: gas supplied to the system via pipeline from a cylinder connected to the gas source platform

Pressure range: gas pressure up to 10atm

Pressure display: adjust the pressurization range via the pressure gauge at the outlet of the pressure reducer

Photocatalytic parameters: if equipped with "lighting module" (configured)

Photoreactor: 20mL quartz reaction tube (micro, small tube diameter, thick-walled, 100% light-transmitting quartz reaction tube)

Irradiation method: zero-distance bottom irradiation

Light source type: monochromatic LED light-emitting chip (fixed wavelength selected or customized as needed, non-traditional filtering mode)

Light source power: 1-10W/site

Light source cooling: can be connected to external circulation cooling

Light source switching: manual wavelength replacement

Light source leakage: minimal (total reflection, zero light pollution, high utilization rate)

Light source lifespan: 5000 hours (ensure cooling, prevent overheating)

Stirring parameters: standard "stirring heating"

Stirring method: synchronous surrounding magnetic stirring (configured with German IKA stirring module)

Stirring speed: 0-1500rpm (requires corresponding stirrer)

Stirring bar: yes (olive type*L13.5mm*220°C)

Material addition parameters:

Suitable materials and viscosity: low-viscosity liquids or dispersed solids

Anhydrous and oxygen-free liquid feeding: yes (syringe puncture sampling)

Anhydrous and oxygen-free solid feeding: yes (zero-loss micro-sampling under nitrogen flow protection or nitrogen flow-protected weighing dish投放)

Portable glove box feeding: yes (entire reaction tube can be placed in a glove box)

Anhydrous and oxygen-free sample collection: yes (online minimally invasive sampling)

Puncture sealing plug: yes (clean sealing plug can be repeatedly punctured, reusable, environmentally friendly and economical)

Secondary sealing function: yes (unique sealing plug puncture needle hole sealing, ensuring airtightness of the sealed tube)

Schlenk technical parameters:

Reactor sealing method: O-ring threaded soft seal

Extended gas line quick connection: yes (new design for quick installation and double shut-off,任意 operation)

Schlenk operation panel: yes (simple and easy-to-use modular gas置換 platform)

Micro-positive pressure Schlenk line: yes (simulates glove box positive pressure system, equipped with high-quality storage氣囊)

Reaction gas Schlenk line: yes (任意 switch between inert gas and reaction gas)

Inert gas Schlenk line: yes (任意 switch between inert gas and reaction gas)

Reaction gas supply method: cylinder supply (requires self-provided cylinder and pressure reducer)

Inert gas supply method: cylinder or fume hood supply (requires self-provided cylinder and pressure reducer)

Safety-related parameters:

Visual protective cover: yes (safety protection,抗 environmental interference)

Safety explosion-proof function: yes (safety protective cover)

Withstand positive pressure: ≤4atm (maximum pressure耐受 for sealed tube reaction)

Maximum vacuum: 0.2mbar (single point can reach 0.15mmHg, requires self-provided 2L/S vacuum oil pump)

Overheat protection: yes (任意 set between 50-360°C, automatic power-off when temperature exceeds set value)

Other characteristic parameters:

Quick懸停 function: yes (quick stop of reaction, lift to stop)

Instrument weather resistance: silver corrosion-resistant aluminum alloy shell (aesthetic and大氣, corrosion-resistant protection)

Timing function: yes (countdown for temperature control and stirring from 0-99h)

Mass volume: 22kg/D*W*H=45*35*65cm

Protection level: Ip42

Power supply: 650W, Ac220-240V, 50/60HZ

Working environment: ambient temperature: 0~35°C, relative humidity: 80%

Noise level: 70dB

Complete synthesis accessories: yes