DDZ-35-80Belt Break Catcher

High-quality DDZ35 Belt Break Catcher Wedge-type belt conveyor, DDZ type belt break catcher, belt break catcher, belt break protector, belt catcher, belt break catcher wedge-type belt conveyor
D-Belt Conveyor  D-Belt Break  Z-Catcher   35-Rated braking force 35kn  80Belt width80cm
Applicable conditions:
Belt width: 800mm-2000mm
Rated braking force;35KN
Frame type: rigid frame type, floor type
Troughing angle: various angles
Technical parameters: single-side braking width: 80mm-160mm
Motion resistance: <400n
Installation distance: 10-12 degrees 50meters13-15degrees  45meters16-18degrees   40meters19-22degrees 35 meters22degrees and above 30 meters
Performance characteristics 1. This catcher adopts an integrated structure, easy installation, high strength, and reliable operation; 2. No external power required, using the downward sliding force generated by the belt after breakage as braking force to catch the sliding belt; 3. Applicable frame
types: fixed type, detachable type, suspended type; 4. Upper brake block can swing and open, upper and lower extension adjustable, braking gap adjustable.
1. During normal operation, the upper brake block and wedge brake block do not contact the belt, and the upper brake block rotates to both sides of the belt, avoiding obstruction of coal transportation. 2.When braking the belt, the downward sliding force of the belt is used as the driving force to self-lock the wedge brake block,
braking the sliding belt without external power. 3. During braking, the belt is clamped between the upper brake block and the wedge brake block, with surface contact between the brake block and the belt, large braking area, and minimal damage to the belt. 4..The depth of the upper brake block into the belt can be adjusted according to the load by adjusting the upper brake block adjustment bolt.
5. The integrated installation bracket greatly increases strength compared to split brackets and is easy to install.
Note: Product images are for reference only, actual products are subject to the company's offerings!

Main products of our company:DTElectric ActuatorDYTZElectric Hydraulic ActuatorElectro-hydraulic jaw gate, electric jaw gate electro-hydraulic corner drive inlet sizeElectro-hydraulic actuator driven electro-hydraulic actuator flat gate valveSteel cord belt end stripperElectric ActuatorDTZElectric ActuatorDYTPElectro-hydraulic ActuatorExplosion-proof ActuatorDEZJaw GateElectro-hydraulic Sector GateBelt StripperSteel Cord End StripperUnilateral DischargerBilateral DischargerDDZType Belt Break CatcherBelt Break Catcher for Belt ConveyorBelt Break Protection Device Belt Break Catcher Layered Belt StripperBelt Conveyor AlignerChain-type Unidirectional AlignerFully Automatic AlignerVariable Trough Angle DischargerElectro-hydraulic DischargerPlow Discharger

Jining Anteli Conveying Equipment Co., Ltd.

Contact: Jia Hui

Mobile: 15965378780

Tel：0537-2340887

Fax:  0537-2340887

QQ:  3128074961

Email:3128074961@qq.com