HRJ-5kN Metallic Bone Plates Bending Fatigue Properties Tester
Functional Parameters:
→HRJ-5kN Metallic Bone Plates Bending Fatigue Tester is used for bending fatigue performance testing of orthopedic bone plates, fixation bone plate bending fatigue tests, stainless steel bone plate fatigue tests, bone biomaterial fatigue tests, fatigue testing of medical device products and related accessories, and fatigue life and high-cycle fatigue testing of medical components.
Constant amplitude stress low-cycle fatigue tests; constant amplitude strain low-cycle fatigue tests; tension-compression fatigue tests; axial constant amplitude low-cycle fatigue tests; axial load fatigue tests; alternating tension-compression fatigue tests. Mechanical testing of biomaterials for medical tissue engineering and medical devices.
→YY/T1503-2016 Surgical Implants - Bending Fatigue Performance Test of Metallic Bone Plates.
→YY/T0342-2020 Surgical Implants - Determination of Bending Strength and Stiffness of Bone Plates.
→YY/T0591-2011 Bone Fracture Fixation Implants - Mechanical Performance Testing of Metallic Locking Intramedullary Nails: Static Four-Point Bending Test of Metallic Locking Intramedullary Nails, Bending Fatigue Test of Locking Intramedullary Nails, Bending Fatigue Test of Locking Intramedullary Nail Locking Screws.
→YY/T0119.5-2014 Spinal Implants - Static and Fatigue Bending Strength Determination Test of Metallic Spinal Screws for Spinal Internal Fixation System Components.
→YY/T0961-2014 Spinal Implants - Evaluation of Static and Fatigue Performance of Spinal Internal Fixation System Components and Connectors: Uniaxial Static Test of Spinal Fixation Systems, Fatigue Strength Test of Spinal Fixation Systems, Anti-loosening Test of Spinal Fixation System Components, Fatigue Test of Spinal Fixation System Connectors, Performance Test of Metallic Spinal Plates, Performance Test of Metallic Spinal Rods, Static Test of Metallic Spinal Screws.
→YY/T0809.4-2018 Surgical Implants - Determination of Fatigue Performance of Femoral Components with Stems for Partial and Total Hip Joint Prostheses.
→YY/T0809.6-2018 Surgical Implants - Neck Fatigue Performance Test and Performance Determination of Femoral Components with Stems for Partial and Total Hip Joint Prostheses.
→YY/T0809.8-2010 Surgical Implants - Fatigue Performance Test of Femoral Components with Stems Under Torque for Partial and Total Hip Joint Prostheses.
→YY/T0809.10-2022 Surgical Implants - Determination of Static Load Resistance of Modular Femoral Heads for Hemi and Total Hip Joint Prostheses.
→YY/T0810.1-2010 Surgical Implants - Determination of Fatigue Performance of Tibial Trays for Total Knee Joint Prostheses.
→YY/T0345-2020 Surgical Implants - General Requirements for Metallic Bone Pins, Determination of Materials and Mechanical Properties of Metallic Bone Pins.
→Dynamic and static test force load ±5kN, indication fluctuation ≤ ±0.5% Fs.
→Servo actuator frequency 0.01–15Hz, amplitude ±30mm.
→Load control, displacement control, deformation control; sine wave, square wave, triangle wave, ramp wave, etc.
→High rigidity and high stability, vibration-free impact streamlined double-column load frame, full digital HRJ-Test Chinese and English version electronic servo dynamic fatigue testing software.