HSY-5198 Drill Pipe Thread Compound Penetrometer (Standard Full Cone Included) is designed and manufactured in accordance with the technical requirements and relevant provisions of the standard SY/T5198-2020 "Drill Pipe Thread Compound" and GB/T269 "Standard Test Method for Penetration of Lubricating Grease and Petroleum Grease". It is mainly suitable for testing the penetration of drill pipe thread compound used for connecting threads of drilling tools in oil and gas fields, mining, and geological drilling. The worked penetration is an indicator of the hardness of the thread compound, which is related to the ease of application. According to the standard requirements, the worked penetration of the drill pipe thread compound should be between 290-350 (0.1mm) at 25 degrees and under a load of 150g (standard full cone). This instrument can also be used for testing materials such as solid fine particles, powders, colloids, frozen substances, as well as food raw materials like cheese, gum, tallow, margarine, cream, fermented products, etc., by adding accessories. It can be widely applied in the food industry, transportation and highway engineering, and other industrial sectors.

I. Main Features and Functions

1. Digital display shows the penetration value, intuitive and clear.
2. The penetration time control device has 6 gears with high timing accuracy.
3. Equipped with electric coarse and fine adjustment for the lifting frame, convenient adjustment, and accurate cone alignment.

4. The cone rod assembly has precise mass, strictly conforms to standards, and is convenient and quick for calibration.
5. Multi-functional: can also be equipped with optional standard cones, sample cups, thermometers, and weights, suitable for measurements according to national standards GB/T 4509-1998, GB/T 4509-2010, and highway standard JTG E20-2011 T0604-2011.

The most notable features of this instrument are: it possesses a software copyright certificate (Certificate No.: 6097415); advanced mechanical design for convenient lifting adjustment; high-precision digital penetration test gauge for reliable measurement results.

II. Main Technical Parameters

1. Measurement range: (0～700) penetration;

2. Penetration time control device: optional 5 seconds, 8 seconds, 10 seconds, 12 seconds, 30 seconds, 60 seconds, time error less than ±0.1 seconds;

3. Resolution: 0.01 mm;

4. Penetration accuracy: ±1 penetration;

5. Standard cone: standard full cone: full cone (102.5±0.05)g, complies with the specifications of national standard GB/T 269;

Optional 1/2 cone and 1/4 cone are also available.

6. Lifting bracket: electric adjustment, dual lifting adjustment mechanism for coarse and fine tuning, facilitating cone tip alignment with the sample surface;

7. Power supply: AC (220±10%)V, 50Hz, power consumption not exceeding 300W.

8. Dimensions: 280mm×350mm×700mm (length×width×height).

9. Others: equipped with cold light source and magnifying glass for ease of use and operation.

(The following schematic shows the test head as a cone; this instrument is also compatible with needle attachments and can be optionally equipped with a constant temperature bath, grease worker, 100,000-time automatic grease shearer, etc.)