The weighted float switch is a type of switch capable of regulating liquid levels in tanks, troughs, or wells. It is an environmentally friendly float switch that is self-adjusting, easy to operate, simple to install, safe and reliable, maintenance-free, and made from non-toxic recyclable materials. It can be used for both water supply control and drainage control. Resistant to sewage, it is widely used in containers such as pools, oil tanks, acid and alkali tanks, barrels, troughs, and containers in households, factories, and mines.

>Product Installation

· 1. Thread the float switch's wire through the concave center hole of the weight, then gently push the weight so that the plastic ring embedded above the hole detaches due to the pressure from the wire end (if necessary, you can also use a screwdriver to remove this plastic ring). Then, place this detached plastic ring on the cable at the position where you want to secure the weight to set the water level.

· 2. Gently pull the cable until the weight's center snaps onto the plastic ring. The weight will not slip as long as it is lightly secured in the plastic ring. If this plastic ring is damaged or lost, it can be replaced with a bare copper wire of the same diameter fastened to the cable.