Guangxi Blown Film Testing Machine Manufacturer Dongguan JiuTong Machinery Co., Ltd. National Unified Service Hotline: 138-2574-4148. A well-established product widely used in university, research institute, and state-owned enterprise tenders.

Our company specializes in the design and processing of rubber and plastic equipment: single and twin screw extrusion pelletizing machines for experimental and production use. Open mills, hot presses, internal mixers, blown film machines, cast film machines, sheet extrusion machines, consumable extrusion machines, melt spinning machines, etc.

SHR-5L High-Speed Mixer Parameters:

1. Total Volume: 5L

2. Effective Volume: 3L

3. Number of Mixing Blades: 2

4. Mixing Blade Speed: 650/1300 r/min

5. Heating Method: Electric Heating (1.8kW) High Flash Point Thermal Oil

6. Mixing Time: 6~10 min/batch

7. Drive Motor: AC Single-Speed Motor

8. Speed: 1440 r/min

9. Voltage: 380V

SHR-10L High-Speed Mixer Parameters:

1. Total Volume: 20L

2. Effective Volume: 10L

3. Number of Mixing Blades: 2

4. Mixing Blade Speed: 650/1300 r/min

5. Heating Method: Electric Heating (4kW) High Flash Point Thermal

6. Mixing Time: 6~10 min/batch

7. Drive Motor: AC Single-Speed Motor

9. Speed: 1440 r/min

10. Voltage: 380V

11. Power: 2.5kW

12.  Equipment Dimensions: 900*320*780

13. Blade Material: Stainless Steel

14. Barrel Material: Stainless Steel

15. Barrel Thickness: 5mm

SJ-30 Single Screw Extrusion Main Unit (Consumable Extrusion Machine)

1.Extrusion Output: 6~10 kg/h

2.Screw Diameter: 30mm

3.Length-to-Diameter Ratio: 28:1

4.Temperature Control Range: ≤300°C

5.Temperature Control Accuracy: +2°C

6.Main Unit Power: 4kW

7.Screw Speed: 0~60 rpm (Variable Frequency Speed Regulation)

8.Gearbox: Cycloidal Pinwheel Type

9.Heating Power: 1.5KW×3 zones, 1 heating zone for the die

10.Gearbox: Hardened Gear Surface, Low Noise

11.Screw and Barrel: Made of 38CrMoAlA, Quenched and Nitrided, Nitriding Layer Depth 0.5-0.8mm.