Due to fluctuations in raw material prices, models and prices may vary. For specific quotations, please contact our sales staff. Thank you.

The mining explosion-proof clay extruder has a fast mud output speed! The clay material is fed into the chamber, and in no time, long strips of clay are extruded smoothly. What used to take hours to prepare is now ready in minutes! The cylindrical regularity and thickness fit perfectly into blast holes. The round clay strips have moderate hardness, allowing for fast and stable blasting—a delight for detail-oriented users!

The PNJ-160 mining clay extruder produces clay strips with an output diameter tailored to your requirements. The output diameter can range from 1.5kW to 5kW. Different needs call for different choices—select the one that suits you best.

Clay Extruder Technical Parameters

Model Rated Voltage Rated Power Output Diameter (Customizable) Clay Moisture Content Spindle Speed Weight Dimensions

PNJ-A160 380V/660V 5.5KW Φ27mm, customizable 20% moisture 22M/min 350kg 1550*450*560

PNJ-B160 380V/660V 4KW Φ27mm, customizable 20% moisture 18M/min 275kg 1550*450*560

PNJ-C160 380V/660V 3KW Φ27mm, customizable 20% moisture 14M/min 200kg 1550*450*560 Depending on user requirements, the clay diameter can be customized.

How to Use the Mining Clay Extruder:

After connecting to the 380V power supply, do not rush to start. Turn the switch on and off three times to ensure everything is functioning properly before proceeding. This step is crucial for safety—do not skip it for the sake of speed.

When preparing clay, maintain a moisture content of around 20%. If the clay is too sticky, add 2-3% sand. After adding water, let the clay sit for at least 20 minutes. During this time, check for any hard lumps and remove them to avoid affecting machine operation.

Before starting the machine, sprinkle some water into the clay chamber (feeding hopper) to moisten it, ensuring smoother clay extrusion. Use a shovel to load the clay, controlling the speed and quantity. If clogging occurs, do not use your hands—use a wooden stick to clear it.

If the initially extruded clay strips are unsatisfactory, do not discard them. Return them to the clay chamber for reprocessing. Cut the clay strips to the desired length. In summer, to prevent drying, cover them with plastic film.

After work, ensure all clay material is extruded from the machine, then rinse thoroughly with clean water to prevent dried clay from clogging the equipment.

Do not blindly choose the power of the mining clay extruder! For small mines, 5.5kW is sufficient, providing full power without interruptions. For large-scale operations, opt for 10kW directly—clay production speed and output are what matter most. Match the power according to your needs.