The mechanical rebar mesh production line is primarily used for the manufacturing of construction rebar mesh panels.

Feeding method: The required lengths of warp and weft wires are pre-cut using an automatic straightening and cutting machine. The warp wires are manually placed at the corresponding wire threading molds, while the weft wires are placed in a dedicated material slot and automatically fed by a servo motor.

Welding: The main machine starts the welding process. This machine adopts synchronous control technology, with sub-control welding and welding time both regulated by a PLC digital programming system. The aperture size can be adjusted directly by inputting values on the touchscreen control panel. Welding is accomplished through spring pressure.

After welding: The servo motor controls automatic mesh pulling until the entire panel is welded. The automatic mesh connecting and output system is then activated, and the next panel begins welding. 

 Technical Parameters 

 Welding Wire Diameter: 6mm-12mm 

Warp Wire Feeding: Pre-cut wires 

Weft Wire Spacing: Minimum 50mm 

Weft Wire Feeding: Pre-cut wires 

Warp Wire Spacing: 100mm-300mm 

Power Supply: AC380V-440V

Number of Warp Wires: 26 

Welding Width: 2500mm 

Mesh Panel Length: 6-12 meters 

Welding Speed: 45 times/minute 

Overall Dimensions: 10*3.4*1.6 (m) 

 All the above parameters can be customized according to customer requirements. 

 Our company provides the technical documentation required for equipment installation and dispatches technical personnel to guide the installation and debugging process. We are responsible for training users in equipment operation and maintenance. 

Company Name: Shenzhou Longshun Wire Mesh Machinery Co., Ltd.
Contact Person: Manager Wen
Contact Number: 15373737477 (same number for WeChat)
Website: http://www.hslongshunjx.com
Company Address: Bingcao Industrial Zone, Shenzhou, Hebei