The mechanical rebar mesh production line is primarily used for the manufacturing of construction rebar mesh sheets. 

Feeding method: The required warp and weft wires for this equipment are pre-cut using an automatic straightening and cutting machine. The warp wires are manually placed at the corresponding wire threading mold, while the weft wires are placed in the material chute and automatically fed by a servo motor. 

Welding: The main machine starts welding: This machine adopts synchronous control technology, with sub-control welding and welding time both regulated by a PLC digital programming system. The aperture size adjustment can be directly input via the touchscreen control panel; welding is completed through spring pressure. 

After welding: The servo motor controls automatic mesh pulling until the entire sheet is welded, then activates the automatic mesh connecting and output system; the next sheet begins welding. 

 Technical Parameters 

 Welding wire diameter: 6mm-12mm 

Warp wire feeding: Pre-cut wire 

Weft wire spacing: Minimum 50mm 

Weft wire feeding: Pre-cut wire 

Warp wire spacing: 100mm-300mm 

Power supply: AC380V

Number of warp wires: 26 

Welding width: 2500mm 

Mesh sheet length: 6-12 meters 

Welding speed: 45 times/minute 

Overall dimensions: 10*3.4*1.6 (m) 

 All the above parameters can be customized according to customer requirements.

Our company provides the technical documentation required for equipment installation and dispatches technical personnel to guide the installation and debugging process. We are responsible for training users in equipment operation, maintenance, and other aspects. 

Company Name: Shenzhou Longshun Wire Mesh Machinery Co., Ltd.
Contact Person: Manager Wen
Contact Number: 15373737477 (same number for WeChat)
Website: http://www.hslongshunjx.com
Company Address: Bingcao Industrial Zone, Shenzhou, Hebei