Network Analyzer ZVB20 Rohde & Schwarz ZVB20 Rental ZVB20 ZVB20 ZVB20

Product Introduction;

ZVB20-R/S Vector Network Analyzer

R/S Network Analyzer ZVB20 Brief Introduction:

R&S ZVB Vector Network Analyzer is suitable for general measurements of passive and active components, with frequency ranges of 300 kHz to 8 GHz and 10 MHz to 20 GHz. R&S ZVB makes vector analysis simpler, especially for measurements of multi-port devices and balanced devices. Due to its measurement functions, technical specifications, fast data acquisition and transmission capabilities, and powerful remote control capabilities, R&S ZVB is an ideal device for R&D and production. The device is compact, weighing less than 20 kg, with dimensions of only 44 cm x 23 cm x 35 cm.

Innovative Multi-Port Concept ◆ Instrument has 2/3/4 ports ◆ Multi-port processing capability ◆ Balanced test capability ◆ Calibration unit, frequency up to 24 GHz;

Outstanding Specifications ◆ 20001 points per trace ◆ Dynamic range better than 123 dB ◆ Power sweep range 50 dB

High Speed ◆ Measurement time <4.5 ms (201 points, frequency sweep mode) ◆ Inter-channel switching time <1 ms ◆ Inter-setting switching time <10 ms ◆ Data transmission time <0.7 ms (201 points, via RSIB) ◆ Capable of synchronously measuring more than one device under test

Modern User Interface ◆ Windows-based, intuitive mouse operation ◆ Hotkey and softkey operation ◆ Large number of channels and traces ◆ Parallel setting management ◆ Operation wizard: e.g., balanced device measurement and calibration ◆ Integrated embedding/de-embedding function

Connectivity ◆ Compatible with traditional design tools ◆ Bidirectional transmission of trace data between PC and R&S ZVB ◆ Remote control via GPIB and LAN port ◆ Digital I/O interface ◆ USB connection 

Features 1) Functions for Optimizing Production Capacity The new platform of R&S ZVB adopts fundamental mixing technology, which has been used in the ZVR series vector network analyzers for 10 years. Its dynamic range is 123 dB, trace noise is less than 0.01 dB, and the measurement bandwidth range is 1 Hz to 500 kHz. With a measurement bandwidth of 500 kHz, the sweep time for 201 points is less than 8 ms. Measurement time can be further optimized through segmented sweeping, with the number of segments limited by the instrument's memory. Sweep parameters (such as frequency point spacing, measurement bandwidth, source level) within each frequency band can be independently set to suit the device under test. Different settings can be stored as files on the hard disk and loaded into the instrument's memory, with each setting representing an independent window. In manual mode, switching between different settings is as simple as a mouse click (setting switching); in remote control mode, setting switching can significantly reduce switching time. Once these settings (including calibration data) are called, they are automatically saved in RAM, allowing rapid switching between different settings via the IEC bus in less than 10 ms. Since trace data is transmitted via the IEC/IEEE bus or LAN port simultaneously with data acquisition, the data transmission time of R&S ZVB is negligible. Based on the multi-source concept, R&S ZVB allows grouping of test ports. Parallel measurement configurations can be defined in the "Port Manager" dialog. Each port group can be measured independently relative to other groups, enabling all groups to measure simultaneously in parallel, thus allowing multiple devices under test or multiple ports of a single device to be measured at the same time.

ZVA40 Vector Network Analyzer, 40GHz, 2-port or 4-port optional
ZVA50 Vector Network Analyzer, 50GHz, 2-port or 4-port optional
ZVA67 Vector Network Analyzer, 67GHz, 2-port or 4-port optional
ZVA110 Vector Network Analyzer, 110GHz, 2-port or 4-port
R&S ZNB4, 2-port, 4.5 GHz, N(f)

R&S ZNB8, 4-port, 4.5 GHz, N(f)

R&S ZNB8, 2-port, 8.5 GHz, N(f)

R&S ZNB8, 4-port, 8.5 GHz, N(f)

R&S ZNB20, 2-port, 20 GHz, N(f), 3.5 mm(m)

R&S ZNB20, 4-port, 20 GHz, N(f), 3.5 mm

R&S ZNB40, 2-port, 40 GHz, N(f), 2.92 mm(m)
ZVB4 Vector Network Analyzer, 300kHz~4GHz, 2-port, 3-port, or 4-port optional

ZVB8 Vector Network Analyzer, 300kHz~8GHz, 2-port, 3-port, or 4-port optional

ZVB20 Vector Network Analyzer, 10MHz~20GHz, 2-port or 4-port optional