Rockwell hardness tester
Contact Info
- Add:九龍坡區(qū)陳家坪印江州二期5棟, Zip:
- Contact: 李科
- Tel:13983972489
- Email:1012507976@qq.com
Other Products
Main Features
● Based on the Leeb hardness measurement principle, it displays the Rockwell measurement interface immediately upon startup.
● Standard Rockwell hardness test block.
● Equipped with a D-type impact device.
● Menu-driven operation with rich and intuitive information.
● High-brightness LED backlight for use in dimly lit environments.
● Power-saving features such as automatic sleep and automatic shutdown, with low power consumption design.
● Powered by ordinary batteries, with a standby time of 100 hours, portable and suitable for field operations.
Applicable Materials
Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile cast iron, cast aluminum alloy, copper-zinc alloy (brass), copper-tin alloy (bronze), pure copper, forged steel.
Main Applications
1. Hardness testing of products in mass production processes; a standard set is generally sufficient to meet testing requirements.
2. Hardness testing for heat treatments such as annealing, tempering, and quenching; if there is a hardened layer, pay attention to its thickness. If the hardened layer is too thin, select a C-type impact device.
3. When testing the hardness of bearings, note the bearing diameter. If the diameter is too small, choose a special support ring.
4. For gear hardness testing, if the gear is too small, select a DL impact device.
5. When testing castings, if surface finish is difficult to achieve, choose a G-type impact device.
Testing Range
Material | Hardness Scale | Impact Device | ||||
D/DC | D+15 | C | G | DL | ||
Steel and cast steel Steel and cast steel | HRC | 17.9～68.5 | 19.3～67.9 | 20.0～69.5 | 20.6～68.2 | |
HRB | 59.6～99.6 | 47.7～99.9 | 37.0～99.9 | |||
HRA | 59.1～85.8 | |||||
HB | 127～651 | 80～638 | 80～683 | 90～646 | 81～646 | |
HV | 83～976 | 80～937 | 80～996 | 80～950 | ||
HS | 32.2～99.5 | 33.3～99.3 | 31.8～102.1 | 30.6～96.8 | ||
Forged steel | HB | 142～651 | ||||
CWT, ST Alloy tool steel | HRC | 20.4～67.1 | 19.8～68.2 | 20.7～68.2 | ||
HV | 80～898 | 80～935 | 100～941 | |||
Stainless steel Stainless steel | HRB | 46.5～101.7 | ||||
HB | 85～655 | |||||
HV | 85～802 | |||||
GC. IRON Gray cast iron | HRC | |||||
HB | 93～334 | 92～326 | ||||
HV | ||||||
NC, IRON Ductile cast iron | HRC | |||||
HB | 131～387 | 127～364 | ||||
HV | ||||||
C. ALUM Cast aluminum alloy | HB | 19～164 | 23～210 | 32～168 | ||
HRB | 23.8～84.6 | 22.7～85.0 | 23.8～85.5 | |||
BRASS Copper-zinc alloy | HB | 40～173 | ||||
HRB | 13.5～95.3 | |||||
BRONZE Copper-tin (aluminum) alloy | HB | 60～290 | ||||
COPPER Pure copper | HB | 45～315 | ||||
Note: When using a Leeb hardness tester, the workpiece must meet the corresponding testing conditions, mainly in three aspects: the workpiece weight should not be less than 2 kg, the minimum thickness should not be less than 10 mm, and the surface roughness should not exceed 1.6 μm. If the above conditions are not met, secure support or dense coupling is required!
Contact: Li Ke Mobile: 13983972489 QQ: 1012507976 Email:1012507976@qq.com
| Industry Category | Instruments & Meters/Testing Machines/Hardness Testers |
|---|---|
| Product Category | |
| Brand: | 重慶邁陽(yáng)機(jī)電 |
| Spec: | |
| Stock: | 100 |
| Manufacturer: | |
| Origin: | China / Chongqing / Jiulongpoqu |
