The low-position photoluminescent evacuation strip is manufactured by printing luminescent coatings and fire safety symbols on the front side of PVC using a special process, resulting in overall base luminescence. Its luminous brightness far exceeds the requirements for fire evacuation. In sudden darkness, it can effectively guide people from hazardous areas to safe zones in the shortest time possible.

The current product is produced using thickened, wear-resistant 0.7mm thick PVC printing. The back of the product features a self-adhesive that is 30% stronger than ordinary products on the market. After prolonged use, the edges do not curl up, and the flame-retardant effect is significant.

The current product dimensions are 1000*82*0.7mm, but the length and pattern can be customized according to customer requirements.



I. Product Features

1. The process of storing and emitting light can be repeated indefinitely without a half-life;

2. In emergencies, the luminous brightness and duration fully meet standards;

3. Energy-saving, environmentally friendly, pollution-free, non-radioactive, and requires no power source;

4. Visible light such as sunlight, lamplight, and stray light can all serve as light storage sources;

5. Simple installation, maintenance-free, and low cost of use.



II. Applicable Areas: Public places such as schools, shopping malls, restaurants, hotels, stations, office buildings, and entertainment venues.



III. Instructions for Use:

Before application: Ensure the wall surface is clean and dry.

During application: Align the arrow direction of the product with the safety exit, and gently apply it to the ground from one side to the other.

After application: Use a clean rubber roller to press from the center outward twice to ensure a flat surface.

After application: Avoid causing the edges to curl within 40 minutes; after 2 hours, the product will fully adhere to the wall surface.