I. Working Principle

Acid Purifier utilizes the principle of thermal radiation to maintain the liquid temperature below the boiling point for evaporation, then condenses the acid vapor to produce high-purity water and high-purity reagents. It is widely used in sample processing and analytical experiments.

II. Product Description

It can meet the low detection limit requirements of ICP and ICP-MS and provide laboratory-grade ultra-pure acid for demanding analytical applications. The main body of the equipment is made of high-purity PTFE and PFA, with the acid reagent contact container made of imported PFA material, resulting in lower background levels, no corrosion, and no contamination. It can handle common laboratory acids such as HNO3, HCl, and HF. Experiments have shown that after one distillation, the metal impurity content of acid with approximately 10 PPB can be reduced to about 0.01 PPB. If higher purity is required, the number of purification cycles can be increased. It is widely used for trace and ultra-trace analysis in industries such as geology, photovoltaics, and quality inspection.

III. Related Parameters:

IV. Product Features

1. The main body of the equipment is made of high-purity PTFE and PFA, with the acid reagent contact container made of imported PFA material, resulting in lower background levels, no corrosion, and no contamination;

2. Environmentally friendly and energy-saving silicone heating jacket, with controllable, stable, continuous, and uniform temperature, high sample recovery rate;

3. Sealed cavity, no acid gas escape, safe and reliable;

4. After one distillation, the metal impurity content of acid with approximately 10 PPB can be reduced to about 0.01 PPB;