Duct Temperature Sensor
Other Products
Duct Temperature Sensor
Product Solutions by Inner Mongolia Deming Electronic Technology Co., Ltd. Contact: 15384841043, Engineer Zhang
Parameters
The duct temperature sensor can be used in various intelligent buildings, airports, train stations, subway stations, pharmaceutical factories, museums, smart buildings, and stadiums. The product features a high-performance built-in linear processor, providing output signals of 4–20mA current, 0–10V voltage, and RS485. Equipped with a stainless steel probe and an IP65 waterproof rating, it meets the measurement requirements of different environments with high precision and stability, enabling rigorous temperature measurement.
Product Introduction
Product Overview
It can be used in various intelligent buildings, airports, train stations, subway stations, pharmaceutical factories, museums, smart buildings, and stadiums. The product is equipped with a stainless steel probe and has an IP65 waterproof rating, meeting the measurement requirements of different environments with high precision and stability, enabling rigorous temperature measurement.
Application Fields
The duct temperature sensor is used in HVAC electronic workshops, computer room environmental monitoring, power environment monitoring, agricultural environmental monitoring, meteorological environmental monitoring, and biopharmaceutical environmental monitoring.
Product Parameters
Temperature | Measurement Accuracy Measurement Range Parameter Stabilization Time Calibration | ±0.2℃, ±0.3℃, ±0.5℃, ±1℃ 0–50℃, 0–80℃, -5–60℃ (Refer to the selection table for details) 2–5 minutes Standard Calibration |
Output Parameters | Signal Output | 4–20mA RL<400 ohm 0–10VD RL>10k ohm (Refer to the selection table for details) |
485 Parameters | Signal Type RS485 Type Connection Address Communication Protocol Data Format Baud Rate | RS485 Serial Port Output Multi-point, Half-duplex 2-wire system, maximum communication distance 1200m, direct terminal connection 1–254, set via switch/software, broadcast address 0, default address 1 MODBUS 1 start bit, 8 data bits, no parity, 2 stop bits 1200bit/s, 2400bit/s, 4800bit/s, 9600bit/s, 19200bit/s, 28800bit/s, 38400bit/s, Set via software, default value 9600bit/s |
Power Consumption | Power Supply | Current Type 24VD±10% Voltage Type 24VD/A±10% RS485 10–28VD |
Wiring Method | Terminal Block Cable Specifications | 5.0mm pitch, M3 steel screw, 0.2Nm torque, 0.02 ohm contact resistance 24–18AWG (0.2–1.0mm2), stripped wire length 6–7mm |
Environment | Operating Environment | Temperature -20...+70℃ Probe up to 100℃ Humidity 0...99%RH, no condensation |
Storage Environment | Temperature -30...+80℃ Humidity 0–95%RH, no condensation | |
Materials and Colors | Housing Probe Probe Length Weight | ABS (Light Blue) 304 Stainless Steel 100/150/300mm, customizable Approx. 100g (Total weight) |
| Industry Category | Media/Books/Other Books |
|---|---|
| Product Category | |
| Brand: | 德明電子 |
| Spec: | 風(fēng)管溫度傳感器 |
| Stock: | |
| Origin: | China / Inner Mongolia / Baotoushi |
