a.1Workspace dimensions: W700*D600*H650mm

a.2External dimensions: W950×H1470×D1130 (for reference only),

a.3Air duct spacing: 80mm;

a.4Insulation thickness: 100mm;

a.5Support feet: 100mm

a.6Heating tube position: left side;

a.7Blower motor position: top;

a.8Air inlet position: right side;

a.9Air outlet position: left;

a.10Filter position: right side

a.11Air circulation method inside workspace: horizontal left-right air supply;

a.12Internal layering: 1 layer stainless steel shelf; removable,

a.13Door opening method: single door, seal is fluororubber hollow seal;

a.14Control box position: top;

a.15.Cleanliness: Dust-free grade: Class 100, using Class 100 filter, filtration efficiency must reach 99.99% for 0.5 micron particles, maximum air volume 3400 CMH

a.16Filter maximum temperature tolerance: 150℃;

b.Main specifications:

b.1Working temperature range: room temperature +15℃~120℃; adjustable

b.2Instrument accuracy: ±0.2℃;

b.3Temperature fluctuation: ≤±1℃;

b.4Temperature uniformity: ≤±2℃;

b.5Heating time: ≤20 minutes (empty chamber, 25℃~60℃);

b.6Temperature control method: PID adjustment, SSR module output control;

b.7Timer range: 1 minute~99 hours 99 minutes, timer cuts off heating and alarms (configurable)

b.8.Cleanliness: Dust-free grade: Class 100 filter must achieve 99.99% filtration efficiency for 0.5 micron particles, maximum air volume 3400 CMH, provide third-party certified cleanliness level test report (arranged by buyer, cost borne by buyer)

Provide Class 100 HEPA filter filtration efficiency, particle diameter 0.35 micron, and exhaust port diameter 60mm for high humidity inside chamber.

b.9Filter maximum temperature tolerance: 150℃;

b.10External surface temperature: ≤ room temperature +15℃;

c.Electrical capacity:

c.1Power supply: 380V  three-phase

c.2Heating power: 4KW; total power: 5kw

c.3Blower power: 750W

c.4Maximum current: 10A

c.5Air switch capacity: 20A

d、Chamber structure:

d.1Oven consists of chamber part, electrical control cabinet part, electric heating and air duct system part, reasonable structure, elegant appearance;

d.2Full circumference argon welding, high temperature resistant silicone gasket, SUS304# stainless steel electric heater, prevents machine from generating dust;

d.3Chamber material: SUS304# 1.5mm oil film brushed stainless steel plate, exterior brushed;

d.4Inner material: Uses SUS304L 1.2mm thick BA grade mirror stainless steel plate, cleaned with alkaline soda water to remove oil stains and avoid generation during baking.

d.5Insulation material: Made of 100K grade high-density high insulation board.

d.6Heater: Uses imported sheathed heater (SHEATHED HEATER) dust-free electric heater.

d.7Cleanliness: Oven interior uses dust-free accessories and materials.

e、Workspace airflow design:

e.1Uses flat horizontal left to right air supply through H.E.P.A (special air duct design), filtration efficiency 99.99%, PARTICLE; (removable)

e.2Exhaust port: 3”φ (with manual open/close damper), to achieve strong circulation effect and cooling;

e.3Absolutely cannot bake flammable items, combustible gases inside chamber

f、Advanced and reliable measurement and control system

f.1Controller uses Taiwan CAHO (or Japan Omron) multi-segment microcomputer temperature controller, with PID control parameter auto-tuning function.

Instrument features: A. Has temperature PID adjustment function;

B.Uses digital display of chamber temperature and multi-segment program control set temperature;

C.Uses armored platinum resistance input;

f.2Operation mode: Constant operation;

f.3Temperature measurement: Uses specially made armored platinum resistance;

f.4Setting accuracy: Temperature: 0.1℃;

f.5Temperature control output: SSR output

f.6Temperature measurement: Uses specially made armored platinum resistance;

f.7Setting accuracy: Temperature: 0.1℃;

f.8Temperature control output: SSR output

g、Comprehensive safety protection measures:

g.1.Leakage circuit breaker

g.2.Over-temperature protection (stops heating but does not cut power)

g.3.Phase loss protection

g.4.Motor overload current protection

g.5.Machine abnormality buzzer alarm

h、Equipment usage conditions:

h.1 .Temperature: 5℃~45℃;

h.2 .Relative humidity: not more than 85%;

h.3.Power supply: three-phase AC 380±38V, frequency: 50±1Hz;

h.4.No corrosive gases present;

h.5.No strong vibrations or air currents present around;

h.6.Must be grounded

h.7.Leave 500mm space around chamber for product installation and maintenance.