GQ-1AOptical Cable Connector Testing Machine Technical Specifications

I. Main Unit Functions

1.Tensile Test: Complies with YD/T814 standard 5.11.1, YD/T925-1997 standard 6.6.1, YD/T814 standard 5.11.2, and YD/T814 standard 5.5.1 and 5.5.2 requirements. Capable of performing conventional unidirectional tensile tests; dual-end引出盒 achieved through two unidirectional tests;

2.Crush Test: Can clamp various optical cable junction boxes and terminal boxes for constant pressure and crush tests, complying with YD/T814-2004 standard 5.11.2, YD/T814 standard 5.11.3, and YD/T925-1997 standard 5.8.2 regulations.

II. Technical Indicators

1.Maximum Load: 2500N

2.Effective Force Measurement Range: 2% ~ 100%

3.Load Accuracy: Indicated value ±1%

4.Test Speed: 5 ~ 500mm/min

5.Speed Accuracy: ≤ Nominal value ±1%

6.Maximum Displacement of Moving Table: 800mm (excluding fixtures)

7.Accessories: One set each of connector tensile fixtures and crush fixtures

8.Dimensions: 2300mm×700mm×600mm

9.Weight: 500kg

10. Power Supply: Single-phase AC 220V / 50Hz  500W

III. Bending Test Section

1.Complies with YD/T814 standard 5.11.4 and YD/T814 standard 5.11.5 regulations. The optical cable is deflected 45°, held for one minute, and returned to the original position; deflected 45° in the opposite direction for one minute, totaling 10 cycles;

2.Deflection count and dwell time can be set; the test is automatically completed from start to finish.

IV. Torsion Test Section

1.Complies with YD/T814 standard 5.11.5, YD/T814 standard 5.11.6, and YD/T925-1997 standard 5.8.2 regulations;

2. Torsion count and dwell time can be set; the test is automatically completed from start to finish.