Binshengxiang Reverse Osmosis Membrane Scale Inhibitor MPS308A is environmentally friendly. MPS308A Reverse Osmosis Membrane Scale Inhibitor is an environmentally friendly liquid scale inhibitor produced by Binshengxiang Chemical. The product does not contain phosphorus, effectively reducing the reproduction of microorganisms in water and extending the service life of equipment.Binshengxiang Reverse Osmosis Membrane Scale Inhibitor MPS308A is environmentally friendly. MPS308A Reverse Osmosis Membrane Scale Inhibitor produced by Binshengxiang Chemical is suitable for various types of membrane materials. The product has always been well received by users, and Binshengxiang Chemical looks forward to cooperating with you.

Below is an introduction to the MPS308A Reverse Osmosis Membrane Scale Inhibitor produced by Binshengxiang Chemical:

MPS308-A Reverse Osmosis Membrane Scale Inhibitor

MPS308-A RO membrane scale inhibitor

Usage Description

Bin-sx MPS308A Reverse Osmosis Membrane Scale Inhibitor is a high-efficiency liquid scale inhibitor/dispersant used to control scaling caused by the precipitation of calcium carbonate, sulfates, and iron oxide in membrane separation systems. Using this scale inhibitor can extend the system cleaning cycle, prolong membrane life, and reduce costs. Bin-sx MPS308A Reverse Osmosis Membrane Scale Inhibitor has been widely used in reverse osmosis and nanofiltration systems. It can be used with reverse osmosis membranes and TFC membrane elements from Dow Chemical (Dow Filmtec), Hydranautics, and domestic manufacturers, as well as nanofiltration membrane elements.

Product Features

? Recommended scale inhibitor by Dow Chemical (Dow Filmtec), Hydranautics, etc.;

? Certified standard for drinking water use;

? Effectively controls calcium carbonate, calcium sulfate, and strontium sulfate scaling; the LSI for calcium carbonate can be as high as +3.0 without causing scaling;

? Reduces scaling and membrane cleaning frequency;

? Suitable for various types of membrane materials;

? Disperses blocking particles to keep the reverse osmosis membrane surface clean;

? Can be used directly or diluted.

Usage Requirements

Dosage

The required dosage should be determined based on the operating conditions of individual systems, calculated according to factors such as feedwater salinity, temperature, recovery rate, and reverse osmosis membrane type. MPS308A Reverse Osmosis Membrane Scale Inhibitor should be continuously dosed into the feedwater before the security filter. The typical dosage is 3-5 mg/l, which may vary depending on water chemistry, membrane type, and system operating parameters (such as recovery rate, temperature, and pressure). The specific dosage should be calculated by the service provider.

Dilution

MPS308A Reverse Osmosis Membrane Scale Inhibitor should be dosed continuously. It is recommended to dose the concentrate directly at the maximum frequency of the dosing pump. It can also be diluted with RO product water or demineralized water, with a dilution factor not exceeding 10.

Physical and Chemical Properties

Packaging and Storage

High-strength plastic drum, 25 kg/drum

Safety and Protection

When handling this product, take labor protection measures. Avoid contact with skin and eyes. In case of contact, rinse thoroughly with plenty of water.

Binshengxiang Reverse Osmosis Membrane Scale Inhibitor MPS308A is environmentally friendly.Binshengxiang Chemical has been professionally producing reverse osmosis membrane scale inhibitors for 18 years. The company has extensive production technology experience and can provide customers with free water quality testing, free samples, free solution design, manufacturer free shipping, manufacturer customization, manufacturer OEM, manufacturer contract processing, manufacturer wholesale, and long-term technical support services. Welcome to call for consultation and discuss cooperation.