Shandong Binshengxiang Reverse Osmosis Scale Inhibitor Product Formula, MPS308 reverse osmosis scale inhibitor is a broad-spectrum liquid scale inhibitor produced by Binshengxiang Chemical, with users across the country.Shandong Binshengxiang Reverse Osmosis Scale Inhibitor Product Formula, When using the MPS308 reverse osmosis scale inhibitor produced by Binshengxiang Chemical, avoid direct contact with the skin. If contact occurs, rinse immediately with plenty of water.

Below is an introduction to the MPS308 reverse osmosis scale inhibitor produced by Binshengxiang Chemical:

MPS308 Reverse Osmosis Scale Inhibitor

MPS308 RO Membrane Scale Inhibitor

Usage Description of MPS308 Reverse Osmosis Scale Inhibitor

MPS308 reverse osmosis scale inhibitor is a broad-spectrum, high-efficiency scale inhibitor specifically developed for reverse osmosis (RO) systems. Practical use has proven that MPS308 is highly effective in removing the following scales: calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, calcium fluoride, silica, and iron. It can control the Langelier Saturation Index (LSI) in concentrate water up to 3.0, Fe3? content up to 1.5 mg/l, and silica content up to 185 mg/l. It is suitable for use with reverse osmosis membranes and TFC membranes from Dow Chemical (Filmtec), Hydranautics, and domestic manufacturers, as well as nanofiltration membrane elements.

Product Features of MPS308 Reverse Osmosis Scale Inhibitor

1. Recommended scale inhibitor by Dow Chemical (Filmtec) and Hydranautics.

2. Does not form insoluble precipitates with iron/aluminum oxides or silicon compounds.

3. Highly effective water treatment scale inhibitor with a wide range of applications.

4. Reduced dosage required, offering a cost-effective solution for scale control.

5. Compatible with various types of membrane materials.

6. Enables higher system recovery rates.

Usage Requirements for MPS308 Reverse Osmosis Scale Inhibitor

Dosage

MPS308 reverse osmosis scale inhibitor should be continuously dosed into the feed water before it enters the membrane system. The typical dosage is 3-8 mg/l, which may vary depending on water chemistry, membrane type, and system operating parameters (such as recovery rate, temperature, and pressure). The specific dosage should be calculated using the supplier's software.

Dilution

MPS308 reverse osmosis scale inhibitor should be dosed continuously. It is recommended to dose the concentrate directly at the maximum frequency of the dosing pump. Alternatively, it can be diluted with RO product water or demineralized water, with a dilution factor not exceeding 10.

Physicochemical Properties of MPS308 Reverse Osmosis Scale Inhibitor

Packaging and Storage

High-strength plastic drum, 25 kg/drum

Shelf life: 2 years

Precautions

During operation, use labor protection measures. Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water.

Shandong Binshengxiang Reverse Osmosis Scale Inhibitor Product Formula, Binshengxiang Chemical specializes in producing reverse osmosis scale inhibitors. The MPS308 reverse osmosis scale inhibitor is highly efficient and broad-spectrum, effectively reducing scaling in reverse osmosis equipment, improving water production and quality. The product has consistently received positive feedback from users. Welcome to inquire and place orders by phone.