Composite Core Rod Winding Testing Machine for Overhead Stranded ConductorsComposite Core Rod Winding Testing Machine

Carbon Fiber Composite Core Rod Winding Testing MachineDiameter 5-11mmComposite Core Rod

Torsion Testing Machine for Fiber Reinforced Resin Matrix Composite Core Rods in Overhead Conductors

I. Equipment Introduction

The Carbon Fiber Composite Core Rod Winding Testing Machine is primarily used for testing the winding characteristics of overhead stranded conductors, fiber reinforced resin matrix composite core rods for cable overhead conductors, and fiber reinforced resin matrix composite core soft aluminum stranded wires with diameters not exceeding 12mm. It consists of a chassis, mechanical transmission components, control components, winding wheels, protective covers, damping devices, guide tubes, and more.

Execution Standards:

DL/T 1436-2015 "Technical Requirements for Composite Core Rod Winding Testing Machines for Overhead Stranded Conductors"

GB/T 29324-2024 "Carbon Fiber Reinforced Composite Core for Overhead Conductors"

II. Functional Features

1. The entire machine adopts a steel structure with an electrostatic spray coating finish. It features a movable acrylic protective cover with excellent transparency and high strength. The winding motor utilizes a servo speed control motor.

2. The Carbon Fiber Composite Core Rod Winding Testing Machine employs control, large-size touch screen operation, enabling one-touch operation. Different composite core rod specifications correspond to winding wheels of different diameters. Test parameters for each specification are saved, requiring only a single touch to complete the test.

III. Main Technical Parameters:

Applicable composite core rod specifications: ?5～?11mm

Winding wheel diameter accuracy: ±0.2mm

Winding (coiling) speed: 0～5 r/min adjustable;

Tension force: < 2% of the nominal tensile strength corresponding stress value, tension force (N)

Counting resolution: 360°/r

Number of winding turns: 1 turn

Damping system loading strength: 0-140Kg

Damping system torque: 50Nm

Pneumatic pressure: 0.4-0.7MPa

Overall dimensions: 2400*750*1900mm (L*W*H)

Operating power supply: 220V/50HZ

Total weight (including winding wheel): approximately 800Kg