GBT23615-2017I-shaped Solid Thermal Barrier Strips for Aluminum Alloy Building Profiles TensileTesting Machine

Aluminum Profiles, I-shaped Thermal BarrierAdhesiveStrip Tensile Testing MachineTensile Strength, Fracture Strain Performance

Computer-Controlled Universal Testing Machine for Thermal Barrier Profiles at High and Low TemperaturesThermal Barrier Strip Tensile Testing Machine

I. Equipment Introduction

The thermal barrier strip tensile testing machine can be equipped with a high and low temperature test chamber device to test the mechanical properties of materials under high and low temperature environments, such as tensile, compression, bending, tearing, peeling, longitudinal shear testing, transverse tensile testing, etc. It mainly completes high-temperature tensile and shear tests and can automatically obtain various material mechanical performance indicators such as tensile strength and maximum test force. It is primarily used in industries such as aluminum processing and energy-saving monitoring, meeting the testing requirements for thermal barrier profiles.

Compliant Standards:

GB 5237.1 Aluminum Alloy Building Profiles Part 1: Base Material

GB T 23615.1-2017 Thermal Barrier Materials for Aluminum Alloy Building Profiles Part 1: Polyamide Profiles

GB T 23615.1-2017 Auxiliary Materials for Aluminum Alloy Building Profiles Part 2: Polyurethane Thermal Barrier Adhesive Materials

II. Technical Parameters

1. Model: WDW

2. Test Force Options: 10kN, 20kN, 50kN;

3. Sensor Accuracy Grade: 0.02%;

4. Equipment Accuracy Grade: Level 0.5;

5. Test Force Measurement Range: 0.4%--100% FS;

6. Test Force Indication Error: ≤ ±0.5% of the indicated value;

7. Force Resolution: ≥ 1/300,000 FS;

8. Displacement Indication Error: ≤ ±0.5% of the indicated value;

9. Test Speed Range: 0.01 mm/min -- 500 mm/min (adjustable);

10. Safety Protection Devices: Electronic limit protection, emergency stop button, and software overload automatic protection;

11. Test Fixture Devices: Tensile, compression, bending, shear (optional)

12. Effective Test Width: 370 mm

13. Effective Tensile Test Stroke: 800 mm;

14. Host Dimensions: 800 x 420 x 1800 mm;

15. Host Weight: Approximately 500 kg.

16. Working Environment: Room temperature - 35°C, relative humidity not exceeding 80%

III. About the Test

Sample Preparation

Use molds with dimensions not less than 300mm x 300mm x 12mm and 170mm x 170mm x 12mm to injection mold thermal barrier adhesive plates. After placing them at room temperature for 168 hours,

prepare the samples using machining methods such as cutting or punching.