Suzhou Shunlu Traffic Facilities Engineering Co., Ltd. Ground Passage Lines within the Factory Premises

1. Workshop Marking and Identification Requirements: Solid or dashed yellow paint lines (Line width 60mm: Product positioning line; Line width 80mm: Equipment area line; Line width 120mm: Main passage line or fire passage marking);

2. Solid red line: Marking requirements for defective product areas;

3. Black and yellow diagonal stripes, line width 50mm: Marking for hazardous material warning areas;

4. Red and white warning lines, line width 50mm: Marking for hazardous material areas such as firefighting equipment, oils, chemicals, etc.;

5. The main vehicle and fire passageways inside the workshop shall be no less than 3.5 meters wide; pedestrian passageways shall be no less than 1 meter wide, and it is recommended to achieve 1.2-1.5 meters wide where conditions permit; forklift passageways shall be no less than 3.5 meters wide; safety passageways shall be marked with solid yellow lines indicating the width, with a line width of 10 cm or 15 cm, and the passage ground shall be marked with green road marking paint to ensure unobstructed access at all times.

6. The height of overhead objects above roadways shall be no less than 4 meters, and the height of overhead objects above pedestrian walkways shall be no less than 2.5 meters; overhead objects shall be securely fixed;

Factory Marking Inspection Requirements: The factory ground must be kept clean, dust-free, and free of debris. There shall be no accumulated water, oil stains, or paint for any reason, and no scattered parts or products. Ground area lines shall be clear and free of peeling, and items shall not be placed over the lines.