VGT-609FTA Ultrasonic Cleaner for Black Matte Film

What is Black Matte Film:

Used for light-blocking sheets and bars, it undergoes a matte surface treatment that reduces reflectivity from 0.4%-1.5% to below 0.1%, effectively minimizing stray light reflection on lenses and presenting a black hole effect for decorative appearance.

Removing Residual Impurities and Watermarks on Black Matte Film:

The VGT-609FTA Ultrasonic Cleaner by WeiguteUltrasonic Cleaner features six functional tanks equipped with a circulating filtration system (bag filtration system), touch screen system, agitation system, ultrasonic cleaning system, convection rinsing system, automatic intelligent robotic arm system, air knife system, and more.

The machine uses aqueous solvent washing and pure water rinsing, making it an environmentally friendly cleaner.

During cleaning, workpieces are subjected to the impact of "cavitation" generated by high-frequency ultrasonic waves and continuous up-and-down motion of the system, which increases liquid friction, enabling rapid removal of contaminants from the workpiece surface and achieving high cleanliness.

Cleaning Process of Weigute VGT-609FTA Ultrasonic Cleaner:

Sensing automatic loading station → 1. Ultrasonic rough cleaning → 2. Ultrasonic fine cleaning → 3. Drip drying → 4. Convection rinsing → 5. Ultrasonic pure water rinsing → 6. Air knife blow-off → Automatic unloading station.

Workpiece and Basket Parameters for Weigute VGT-609FTA Ultrasonic Cleaner:

1.Basket load capacity: Rated load Min 10Kg Max 15Kg;

2.Transfer: Horizontal shuttle type, automatic intelligent robotic arm transfer;

3.Cleaning cycle: Adjustable per basket from 3 to 15 minutes.

Equipment Requirements for Weigute VGT-609FTA Ultrasonic Cleaner:

1.Power supply within 2 meters: 380V±10% /50Hz three-phase four-wire; maximum cleaning power 15KW;

2.Tap water supply within 2 meters: 3/4″ interface, flow rate 300--500L/h;

3.Pure water equipment within 2 meters: 1/2″ interface, flow rate 500--1000L/h;

4.Drainage channel of 2″ or larger nearby.

"Ultrasonic Cleaning Tank" of Weigute VGT-609FTA Ultrasonic Cleaner:

Structure:

1.Each tank has four-sided overflow ports with a 35 mm wide overflow channel; each tank is an independent circulating tank, where cleaning solution is pumped from the storage tank through filtration and returned to the cleaning tank, i.e., mother-daughter tank circulation;

2.Equipped with an independent circulating filtration system;

3.Each tank bottom has drain valves connected in series to the main drain pipe;

4.External agitation system (shared for tanks 1-2);

5.A scraping device is installed above the first tank's storage tank.

Storage Tank:

1.Divided into two chambers by a partition; cleaned solution after oil separation is pumped back into the cleaning tank via circulation pump, achieving self-circulation and improving solution utilization, while separated oil is discharged to the main drain pipe;

2.Tap water inlet, connectable to each cleaning tank and storage tank;

3.No heating system included;

4.Equipped with low-level switch, automatic audio-visual alarm when water level is low, alarms connected in series;

5.Drain valve at the bottom of the storage tank, connected in series with cleaning tanks for simultaneous drainage to the main pipe.

"Convection Rinsing Tank" of Weigute VGT-609FTA Ultrasonic Cleaner:

Structure:

1.Supplementary cleaning;

2.Each tank has a single-sided overflow port with a 35 mm wide overflow channel;

3.Each tank bottom has drain valves connected in series to the main drain pipe.

Convection System:

Location:

1.An inlet is opened on one side of the tank, and an outlet on the opposite side;

2.Under pump action, convection is formed to act on the workpiece.

Convection:

1.Uses "Nanfang" stainless steel water pump with a coarse filter installed in front of the pump;

2.A ball valve added before the water pump allows adjustment of spray pressure.

"Machine Frame Chassis and Panels" of Weigute VGT-609FTA Ultrasonic Cleaner:

1.The entire frame is made of steel profiles, with decorative panels on the front and sides; panels are hinged flip-type, made of stainless steel sand-textured board, reflective surface, elegant and stylish;

2.No casters at the bottom; cleaning operation table height is 950mm.