Laser Beam Splitter ComponentsUltrasonic Cleaning MachineVGT-507FTA

Laser Beam Splitter ComponentsUltrasonic Cleaning MachineEquipment Introduction:

Laser beam splitters include components such as gratings, laser cube prisms, laser polarizing cube prisms, and laser harmonic beam splitters. These components serve to separate and divide laser beams within optical paths. They are widely applicable in laser optical systems, educational research, and related fields.

The VGT-507FTA Laser Beam Splitter Components Ultrasonic Cleaning Machine is a non-standard ultrasonic cleaning machine. The equipment features five functional tanks and is equipped with a circulation filtration system, automatic temperature control system, touchscreen system, agitation system, ultrasonic cleaning system, spray rinsing system, automatic intelligent robotic arm system, and loading/unloading systems.

This machine utilizes environmentally friendly solvents such as neutral aqueous solutions, ethanol, and IPA. With mature processing technology and automated production line operation, it thoroughly removes contaminants and moisture from optical components, meeting high cleanliness standards without water stains. It is specifically designed for the optical industry.

Laser Beam Splitter ComponentsUltrasonic Cleaning Machine Process Flow:

Manual Loading → Automatic Loading → 1. Ultrasonic Acid Pickling → 2. Spray Rinsing → 3. Ultrasonic Pure Water Rinsing (Agitation) → 4. Ultrasonic Pure Water Rinsing (Agitation) → 5. Ultrasonic Pure Water Rinsing → Automatic Unloading → Manual Unloading.

Laser Beam Splitter ComponentsUltrasonic Cleaning MachineMaintenance Guidelines:

1. During cleaning, special attention must be paid to preventing conductive liquids (e.g., water) from splashing into the air intake vent on top of the ultrasonic control cabinet, as this could cause severe damage to the machine's circuitry.

2. Keep the machine clean when not in use and always turn off the power after operation.

3. Avoid collisions or severe vibrations during use, as the machine is not impact-resistant.

4. Keep the machine away from heat sources to prevent damage to electronic components and circuits. Also, avoid placing the machine in humid environments.

5. The machine should not operate continuously for more than 4 hours. If extended operation is necessary, turn the ultrasonic adjustment knob to the "0" position and allow the cooling fan to continue running for at least 2 minutes to dissipate heat from the control cabinet.

6. After prolonged operation, set the power knob to zero and let the fan run for an additional 3-6 minutes before shutting down to ensure internal heat dissipation.

7. Regularly settle, filter, or replace the cleaning solution to maintain optimal cleaning performance.